







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Plant Prefab Home Additions & ADU: The Vallejo Owner’s Guide
We build and finish Plant Prefab-compatible home additions and ADUs in Vallejo, and installed projects here run $45,000 – $130,000 for an addition, with detached ADU construction at $90,000 – $220,000 and garage conversions at $30,000 – $80,000. We’re an independent remodeling contractor, not affiliated with Plant Prefab, so we work to the panel system’s specifications and carry the finish work through to your final inspection. You get a written price before any work starts and the 365-Day Done Right Promise on everything we complete.

Owners usually find out something is off in one of two ways: the prefab structure arrived fine but the site work, foundation, and utility tie-ins don’t line up, or a previous finish-out starts failing at the seams. A door that won’t latch in summer. A gap where the addition meets the original house. Baseboard pulling away near an exterior wall. In Vallejo we see this a lot on hillside lots where the ground moves and the tie-in wasn’t engineered for it.
Which Plant Prefab Models This Applies To

Plant Prefab builds modular and panelized units across several product lines, from attached additions and accessory dwelling units to larger custom homes. The part that matters for you isn’t a serial number on a hinge – it’s the interface between the factory-built structure and everything we build on site: the foundation system, the roof tie-in to your existing Vallejo house, the mechanical rough-in, and the exterior envelope at the seam. Those are where nearly all compatibility problems show up.
Identify your unit by the stamped plan set and the manufacturer’s label on the structural panels, not by memory. Measure the panel module and the seam dimensions before we quote; a few inches of drift between the as-built foundation and the delivered module changes the scope and the price. On the OEM-versus-aftermarket question: structural and envelope components should match the manufacturer’s spec, full stop. Finish materials are where you have real choice, and that’s where we bring in documented brands. KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler fixtures are traceable, spec’d, and warranteed, so the finish carries the same paperwork the structure does.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Plant Prefab Home Additions & ADU Is Failing
- Separation at the tie-in. A visible gap or crack where the addition meets the original wall usually means differential settlement – the two structures are moving at different rates. In Vallejo’s expansive clay soils, that’s common on older lots, and it needs to be diagnosed before you caulk over it.
- Doors and windows that stick seasonally. Binding that comes and goes with the weather points to moisture-driven movement in the frame or the foundation, not a bad hinge. It’s an early signal that water is getting in somewhere.
- Roof or ceiling stains near the seam. A water mark along the roof-to-wall junction almost always traces to failed flashing at the transition. That’s the highest-risk detail on any modular addition, and it’s the one we inspect first.
- Soft or spongy flooring at exterior walls. This means the subfloor is taking on moisture, usually from a drainage or vapor barrier problem at the foundation. Left alone it rots the substrate and spreads.
- Baseboard and trim pulling away. Interior trim that gaps at the wall means movement – either the structure is settling or moisture is swelling the drywall and framing. It’s cosmetic until it isn’t, so get it looked at.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s how the numbers break down for Vallejo, as installed prices:
- Home addition: $45,000 – $130,000
- Detached ADU construction: $90,000 – $220,000
- Garage conversion ADU: $30,000 – $80,000
What drives the range: foundation and site work, the length and complexity of the utility runs, whether the roof needs a full tie-in or a partial, permit requirements, and the level of finish you choose. Those figures are parts plus labor, written line by line. Before any work starts you get a written price you can read, and the scope doesn’t move at the door. Every completed project carries the 365-Day Done Right Promise – if the work fails inside the first year, we come back and correct it at no charge. That’s the whole guarantee, in plain terms.
DIY or Call Us?
You can safely check a few things yourself. Walk the perimeter of the addition and photograph any gap at the tie-in. Note which seasons the doors stick. Look for water staining on ceilings and floor edges. Those observations help us quote accurately and cost you nothing.
What you shouldn’t tackle is structural or water-management work – foundation repairs, roof flashing at the seam, or opening the envelope to inspect framing. Those go wrong quietly and expensively, and a small flashing fix done badly turns into a rot problem in one wet season. We’re licensed and insured, our technicians have up to 22 years of experience, and they’re background-checked and uniformed, so you know who’s on your Vallejo property. Call (844) 560-4789 and we’ll schedule a free estimate and tell you honestly what needs doing.
FAQs

The structure itself should hold for decades if the foundation and envelope are done right – the factory-built panels aren’t the weak point. What determines lifespan is the site work: drainage, foundation, and the roof tie-in. Get those right in Vallejo’s wet winters and you’re looking at a long-lived building. Call (844) 560-4789 for a free assessment of your specific unit.
Often yes. Seam separation, flashing failures, and trim movement are usually repairable at a fraction of replacement cost. Structural failure of the foundation or subfloor is where repair stops making sense. We’ll tell you which side of that line you’re on before you commit. Call (844) 560-4789 for a free estimate.
A finish-out or repair at the tie-in typically runs a few days to a couple of weeks; a full addition or ADU build runs months. The timeline depends on permit turnaround and scope, and you get both in writing before we start. Call (844) 560-4789 and we’ll walk you through the schedule for your project.
We work to the manufacturer’s stamped plan set and specifications – we don’t guess at compatibility. Structural and envelope components match spec; finish materials come from our documented roster (KraftMaid, Wellborn, Cambria, Silestone, Kohler, and more) so everything is traceable and warranteed. Call (844) 560-4789 for a free estimate and we’ll confirm exactly what your Plant Prefab unit needs.
Written by the team at Bradford Remodeling Co Vallejo, serving Vallejo and nearby areas.












