







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Tub-to-Shower Conversion Cost in Vallejo?
Tub-to-shower conversion in Vallejo costs $3,500 to $10,000 for most homes, with the typical project landing around $6,200. The low end covers a straightforward alcove swap with a prefabricated pan and acrylic walls; the high end covers custom tile, a relocated drain, new valves, and a frameless glass enclosure. That range is for the finished job: demo, waterproofing, tile or panel, fixtures, and haul-away. If someone quotes you $2,000 flat over the phone, ask what’s missing from the scope, because something always is.
We give every Vallejo homeowner a written price before any work starts. Not a ballpark. Not a “depends on what we find.” A number on paper, tied to a scope you can read, backed by our home remodeling services and the 365-Day Done Right Promise.
Key Takeaways
- Most Vallejo tub-to-shower conversions run $3,500 to $10,000, driven by tile choice, drain location, and whether the valve gets replaced.
- Vallejo’s older housing stock (much of it built between 1920 and 1965) means cast iron tubs, galvanized supply lines, and surprise rot behind the surround. A good written estimate budgets for what’s behind the wall, not just what’s in front of it.
- Aging-in-place safety upgrades (grab bars, curbless entry, a bench) add $400 to $2,500 and are often the whole reason for the conversion.
- Every Bradford project ends with a clean site, a documented scope, and a signed written guarantee. The 365-Day Done Right Promise covers the full year: if the work fails inside that window, we return and correct it at no charge.

Tub-to-Shower Conversion Cost Breakdown (2026)
Here’s how the $3,500 to $10,000 range breaks down for a Vallejo job. These are line-item ranges for a standard 5-foot alcove; larger or walk-in configurations push toward the top of each band.
| Line Item | Price Range | What It Covers |
|---|---|---|
| Tub removal and demo | $300 – $700 | Cast iron adds cost over acrylic; includes haul-away and disposal. |
| Rough-in plumbing (drain relocation, valve) | $500 – $2,000 | Moving the drain center or switching to a single-handle pressure-balance valve. |
| Substrate and waterproofing | $600 – $1,600 | Cement board, a bonded waterproofing membrane, and proper slope to the drain. |
| Prefabricated shower pan | $400 – $1,200 | Acrylic or fiberglass pan, including a curbless or low-threshold option. |
| Wall finish: acrylic surround vs. tile | $900 – $4,000 | Acrylic panels are the low end; porcelain or ceramic tile runs higher; natural stone higher still. |
| Shower valve and trim, head, and controls | $300 – $1,500 | Kohler and Moen fixtures we install carry manufacturer specs and warranties that back our own guarantee. |
| Glass enclosure and door | $500 – $2,200 | Framed sliding door at the low end; frameless 3/8″ glass at the high end. |
| Niche, bench, grab bars, and safety hardware | $300 – $2,500 | Aging-in-place add-ons: recessed niche, built-in bench, ADA-compliant grab bars. |
| Permit and inspection fees | $150 – $600 | Vallejo Building Division permit, required when plumbing is altered or a new drain line is run. |
Add those up and most Vallejo projects fall between $3,500 and $10,000, exactly as the lead range says. Where you land depends on how much of the existing plumbing stays put, whether the walls get tile or panels, and how much safety hardware goes in. A conversion that keeps the existing drain location and valve, uses acrylic panels, and skips the glass door sits near $3,500. A conversion with a relocated drain, a single-handle Kohler valve, porcelain tile to the ceiling, frameless glass, and a curbless entry with grab bars lands near $10,000.
If you’re weighing this against replacing the tub with another tub, our Vallejo service area page lays out how the work is scheduled here and what neighborhoods we’re in each week.
What Affects Tub-to-Shower Conversion Pricing in Vallejo
Six things move the number more than anything else. None of them is a mystery to a contractor who’s worked this market.
- The age of the plumbing behind the wall. Vallejo has a lot of homes from the 1920s through the 1960s, and many still have galvanized supply lines or cast iron drain stacks. We open the wall and find these regularly. A pitted galvanized line feeding the shower gets replaced while the wall is open, because closing it back over a failing line is how a $4,000 job turns into two jobs.
- Drain location. Most tubs have the overflow on one end and the drain under the toe; moving the shower drain to center is a slab or subfloor job. On a second-floor bathroom over a wood subfloor, it’s a manageable cut-and-frame. On a ground-floor slab, it’s concrete cutting, which adds $300 to $800.
- Tile versus acrylic. Porcelain tile over a properly waterproofed substrate adds $500 to $2,000 versus acrylic panels, depending on the tile and whether it runs floor to ceiling. We install both, but we won’t skip waterproofing on either. The tile is the finish; waterproofing is the function.
- Curbless or low-threshold entries. Aging-in-place is the top reason Vallejo homeowners call about conversions. Cutting down the curb means recessing the pan into the subfloor, which adds $800 to $2,000, but it’s what makes the shower usable without a step.
- Behind-wall surprises. Water damage behind a 20-year-old surround, a soft spot in the subfloor, a vent stack in the wrong place. Good written estimates carry an explicit allowance for these, so the final invoice doesn’t move. In 2026, a typical surprise allowance on a Vallejo conversion runs $500 to $1,500.
- Contractor selection and scope discipline. The spread between the lowest bid and the highest on the same job runs 30% to 50% in this market. The lowest bid often excludes waterproofing, permit, and haul-away; those line items get added at the door. Our response is The Garrison Standard: a written price, a documented scope, and a background-checked, uniformed technician showing up on the day scheduled.
Vallejo weather matters less here than in most trades, but it isn’t irrelevant. The enclosed shower in a poorly vented hall bath is the one that grows the mold, and we see this most in tighter post-war floor plans where the bathroom has no window and only a ceiling fan. Part of the estimate conversation is whether we add a properly sized exhaust fan, which runs $200 to $450 installed.

How to Save on Tub-to-Shower Conversion
The way to save money on a Vallejo conversion is not to pick the lowest bid. It’s to keep the scope sensible and the specification honest. Here’s what actually moves the price in your favor.
- Keep the drain where it is. If the existing tub drain can be reused (some can, some can’t), you save the concrete or subfloor work. Ask the estimator to check drain location before the number is written down. It’s the single largest variable in the line items above.
- Go acrylic if aging-in-place is the goal, not resale. A mid-grade acrylic surround in a well-prepped substrate is a solid, clean finish at the low end of the range. Tile is the right call if the bathroom’s appearance is the point and the budget covers it. If it’s the only bathroom in a 1950s Vallejo ranch, function first.
- Bundle the conversion with adjacent work. If the same bathroom needs a new vanity, our bathroom remodeling work is priced with the shower conversion under one scope, because the demo, permit, and inspection are shared. That’s typically less than doing them separately.
- Upgrade fixtures to the documented brands. Kohler and Moen valves, trim, and showerheads are the ones we install; they come with manufacturer spec sheets and warranties that back our 365-Day Done Right Promise. Where a budget is tight, we put the money into the valve (which lives inside the wall) and choose finish and trim from the middle of the range.
- Get a written price and hold to it. A written price before work starts is what keeps the “surprise” out of the final invoice. We’ll walk the bathroom with you, open the access panel, look at the existing plumbing, and put the scope on paper.
Free estimates are the start of every job here. If you’d like one in Vallejo, call (844) 560-4789. A live person answers, day or night.
Should You Convert a Tub to a Shower, or Replace the Tub?
For most Vallejo homeowners who are 55 or older, or who plan to stay in the house past retirement, the conversion is the right call. A step-over tub becomes a daily hazard as balance and grip change; a curbless shower with a bench and grab bars does not. For a family with young kids and only one bathroom, a tub still has a place, and the conversion might not be worth doing until the kids are older. The math that matters: the conversion costs $3,500 to $10,000, versus a full bathroom remodel at $9,000 to $28,000, versus a standalone shower replacement at $3,000 to $8,500. If the rest of the bathroom is in decent shape, the conversion is the middle, sensible path.
If the whole bathroom is tired (old vanity, dated tile, failing fan), it may make more sense to look at small bathroom remodeling and fold the conversion into a full scope under one written price and one guarantee.
What Does a Tub-to-Shower Conversion Include?
A proper conversion is more than pulling the tub and dropping in a pan. Here’s what should be in the written scope, and what to ask about if it isn’t.
- Removal and disposal. Tub out, old surround and substrate out, hauled away.
- Inspection of the framing and substrate. Check for rot, water damage, and code issues while the wall is open. If the subfloor needs replacing, that’s a line item, not a surprise.
- Rough-in plumbing. New shower valve, drain, and any supply line updates. The old valve body (often a two-handle from the 1970s or earlier) gets replaced with a single-handle pressure-balance valve that’s code-compliant.
- Waterproofing. A bonded membrane over cement board, sloped to the drain, with seams taped and the corners sealed. This is where cheap jobs fail: no waterproofing behind the tile means water finds the subfloor within a couple of years.
- Pan and walls. Prefabricated pan or a tiled pan with a proper pre-slope. Walls in acrylic or tile.
- Fixtures and glass. Showerhead, controls, trim, and either a framed or frameless glass enclosure.
- Safety hardware where specified. Grab bars anchored to blocking (not just drywall anchors), a bench, a niche.
- Permit and inspection. Vallejo requires a permit when the plumbing is altered or a new drain is run. The final inspection is part of the close-out, and the signed written guarantee follows.
None of this is optional for a job we put our name on. Every Bradford project is documented, inspected, and closed out clean, and every completed job carries the 365-Day Done Right Promise in writing.
How Long Does a Tub-to-Shower Conversion Take in Vallejo?
A tub-to-shower conversion takes 7 to 12 working days for a typical Vallejo alcove job. Acrylic surround and preformed pan: 5 to 7 days. Tile, with a relocated drain and a glass enclosure: 9 to 12 days, plus weather- or schedule-dependent inspection delays. Demo takes a day, rough-in and inspection take two to three, then waterproofing and tile take three to five, and glass and trim close it out.
If the answer you get from another contractor is “two days,” that’s usually acrylic over the existing substrate, no permit, and no waterproofing. Which is fine for a rental flip and not fine for the bathroom you’re going to live in for the next 20 years. We don’t do the two-day version; the written scope tells you why.
Do You Need a Permit for a Tub-to-Shower Conversion in Vallejo?
Yes, if the plumbing is altered. The City of Vallejo Building Division requires a permit when you change a shower valve, move a drain, or run new supply lines. A like-for-like surround swap with no plumbing change may be exempt, but we pull the permit anyway when the scope touches plumbing, because the inspection is what makes the 365-Day Done Right Promise meaningful. Permit fees on a conversion run $150 to $600, and they’re on the written price before we start.
If the job is a full bathroom remodel rather than just the conversion, permit scope expands to include electrical and ventilation. Our written price accounts for that upfront, so the number on paper is the number at close.
Why Choose Bradford Remodeling Co Vallejo for a Tub-to-Shower Conversion?
Because the job should be squared away before the first tool comes out, and because Vallejo homeowners have been burned enough by contractors who reprice at the door and no-show on the first day. Bradford Remodeling is a member of the Garrison Partners family, established in 2004. We operate as an independently owned and operated business held to The Garrison Standard, and The Garrison Code is what we point to when we explain why every job runs the same way: written price, documented scope, background-checked uniformed technicians, live-person phone coverage.
Our technicians have up to 22 years of experience, and the materials we install are a documented roster of name brands (Kohler and Moen for shower valves and trim, among others), so specifications are traceable. If the work fails within the guarantee period, we come back and correct it at no charge: that’s the 365-Day Done Right Promise, and it’s on paper, in your hand, at close.
Straight number, clear scope, and a guarantee that holds. That’s the whole pitch.
FAQs – Tub-to-Shower Conversion Cost
How much does a tub-to-shower conversion cost in Vallejo?
Tub-to-shower conversion in Vallejo runs $3,500 to $10,000, with a typical job around $6,200. The low end is a prefabricated pan and acrylic surround on existing plumbing; the high end is custom tile, a relocated drain, frameless glass, and safety hardware. Call (844) 560-4789 for an exact written quote; estimates are free.
Is it cheaper to repair a tub or convert it to a shower?
Repair is cheaper in the short term: a leaky valve repair runs $150 to $400, a reglazed tub $400 to $900. But if the tub is failing because the surround is shot, the subfloor is soft, or the wall behind is water-damaged, repair is money spent on a re-do. The conversion at $3,500 to $10,000 is the durable fix. We’ll tell you which one your bathroom needs. Call (844) 560-4789.
Do I need a permit for a tub-to-shower conversion in Vallejo?
Yes, when the plumbing is altered. The City of Vallejo requires a permit when a shower valve is changed or a drain is moved. Permit fees run $150 to $600 and appear as a line item on our written price before work begins. If a contractor tells you no permit is needed, ask to see the written scope. Then call us at (844) 560-4789 for a free comparison.
How much does a walk-in shower cost in Vallejo?
A standalone walk-in shower installation runs $4,500 to $12,000 in Vallejo, while a conversion that reuses the existing tub footprint runs $3,500 to $10,000. The difference is demo and drain relocation. For a full consultation on which path fits your bathroom, call (844) 560-4789; the estimate is free and the price comes in writing.
Can you do a curbless shower for aging in place?
Yes, and it’s a common request in Vallejo. Curbless entry adds $800 to $2,000 over a standard curb, driven by recessing the pan into the subfloor. Grab bars, a bench, and a handheld showerhead add another $300 to $1,200. For a written price on the safety package that fits your home, call (844) 560-4789.
What’s included in the 365-Day Done Right Promise?
Every Bradford project carries a written year-long guarantee. If the work fails within that window, we return and correct it at no charge. That covers the waterproofing, the tile or panels, the valve and trim, and the installation, for the full year. The written guarantee is signed and handed over at close, along with the documented scope. Questions? Call (844) 560-4789 and a live person will pick up.
Ready for a Written Price on Your Vallejo Conversion?
Call (844) 560-4789 and we’ll schedule a walk-through. We’ll look at the bathroom, open the access panel, check the existing plumbing, and put a number on paper: $3,500 to $10,000 for most Vallejo homes, with the scope and the guarantee written into the estimate. A live person answers, day or night. No automated systems. No callback queue. Just a real conversation about your bathroom, and a price that doesn’t move after you sign.
Pricing reflects the Vallejo market as of 2026. Bradford Remodeling Co Vallejo offers free estimates – call (844) 560-4789.
Written by the team at Bradford Remodeling Co Vallejo.
What Our Customers Say
"Respectful crew. Covered the floors and swept every day."
- Jackie T."Primary bath redo. Tile is straight, shower pan was flood tested, and the vanity fits perfectly."
- Tricia S."Great work. Countertop install slipped by a week, but they explained and kept us informed."
- Nora L.












