







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Refacing Kitchen Cabinets Costs in Vallejo, CA
Refacing kitchen cabinets in Vallejo runs $14,000 to $45,000 as part of a full kitchen scope, with the refacing portion itself typically landing between $4,000 and $13,000 in cabinet work. The exact number depends less on the door style you pick and more on what’s behind the doors. In Vallejo’s pre-1950 housing stock, aging cabinet boxes, damp raised foundations, and shimmed-to-plumb plaster walls add prep labor that a generic refacing quote never prices in. We put the full line-item scope in writing before the first door comes off. Call (844) 560-4789 for a free estimate.

Why a Vallejo Refacing Quote Should Start at the Cabinet Box, Not the Door
A 1940s kitchen near Mare Island is not the same substrate as a 1970s tract home out toward the east side of town. The difference shows up in labor hours, and labor hours are where most refacing estimates either hold or fall apart.
Here’s the core problem. Refacing replaces the door and drawer fronts and applies a new veneer or laminate skin to the visible sides of the cabinet box. The box itself stays. If that box is solid, the job is straightforward. If it’s absorbed moisture for decades sitting on a pier-and-post foundation, if the plywood sides are stained from years of cooking smoke, or if the whole run has been shimmed to meet a wavy plaster wall, the box needs real prep before any new front goes on. That prep is the part most bids skip, then surprise you with at the door.
Vallejo’s coastal-influenced climate matters here. Cool, foggy summers and wet winters off San Pablo Bay keep moisture in the wood of raised-foundation homes longer than most homeowners realize. A cabinet box that reads solid to the eye can still have a swollen substrate that won’t hold a new hinge plate or a new veneer skin cleanly. Before we quote a refacing job in Vallejo, we inspect the box material itself, not just the face frame and the layout.
The Three Cost Drivers Generic Refacing Pages Skip
Every refacing estimate in Vallejo comes down to three variables. Get these right in the written scope and the number you see on day one is the number on the invoice.
- Substrate condition. Original fir framing and solid plywood boxes hold up well and often just need cleaning and sanding. Particle board boxes from later remodel eras are a different story. If they’ve swelled from moisture, no veneer or new door will sit flat over them without corrective prep or partial box replacement.
- Wall-plumb variation. Prewar plaster kitchens in the Heritage District and Old Town rarely have a level or plumb wall. A run of cabinets shimmed to meet a wall that’s out of plumb by half an inch means trim work, filler pieces, and custom cuts that standard refacing kits don’t account for.
- Moisture and remediation prep. Raised-foundation homes near the waterfront and San Pablo Bay sometimes need a dehumidification period or localized mold remediation before new materials go on. That’s real prep labor, and it belongs in the written scope, not discovered mid-job.
If a refacer quotes you a flat number without inspecting the box substrate and wall plumb first, they’re quoting a best-case kitchen that may not be the one you live in.

The Vallejo-Specific Snag: Non-Standard Cabinet Depths in Heritage District Bungalows
Heritage District bungalows and prewar Craftsman homes often have cabinets built 11 to 12 inches deep, sized around original radiator placement or built out to clear plaster wall thickness that today’s stock kitchens don’t have. Standard refacing door and drawer fronts are cut to fit standard depths. When a box is shallower, the fronts need custom sizing and the hardware layout changes with them. That’s a detail a generic refacer won’t catch until the doors are on order and don’t fit. It’s also the kind of thing we flag during the estimate, because it changes the written scope.
If your cabinets sit against an original radiator or a plaster wall that’s thicker than today’s standard, tell us up front. It moves the number, but it moves it honestly.
What a Bradford Refacing Line-Item Scope Looks Like
Here’s what we put in writing before any work starts, broken into the four categories that make a refacing bid comparable across contractors.
| Line Item | What It Covers | Typical Range (Vallejo) |
|---|---|---|
| Door and drawer fronts | KraftMaid or Wellborn fronts in your chosen style and finish | $2,500-$6,500 |
| Substrate prep labor | Cleaning, sanding, box repair, shim adjustment, plaster-wall fitting | $1,200-$3,800 |
| Hinge and hardware allowance | Soft-close hinges, pulls, drawer slides | $400-$1,200 |
| Veneer or laminate skin | Visible box sides, face frames | $600-$1,800 |
Total refacing scope typically lands between $4,000 and $13,000, which sits inside our broader Kitchen Remodeling in Vallejo range of $14,000 to $45,000 when refacing is paired with countertop, backsplash, or a full Kitchen Remodeling scope. Countertop installation in Vallejo runs $2,000 to $6,500 on top of refacing if you’re replacing surfaces too. That cabinet installation base is $4,000 to $13,000 if you decide replacement makes more sense than refacing.
We work with KraftMaid and Wellborn cabinetry on the cabinet side because both manufacturers publish specifications and warranties that back up the written guarantee we give you. When you’re comparing bids from other refacers, ask to see the material spec sheet and the warranty in writing. If either is missing, the number isn’t comparable.
What the 365-Day Done Right Promise Covers on a Refacing Job
The 365-Day Done Right Promise is a written guarantee on every completed project. If the work fails inside the guarantee window, we come back and correct it at no charge. On a refacing job specifically, that covers the two most common ways refacing fails: delamination (the veneer skin peeling off the box over time) and door alignment drift (doors that sag or rub because the box settled after installation).
A verbal “we’ll come back if there’s a problem” from an unlicensed refacer is worth exactly what you paid for it. A written guarantee with a defined window and defined coverage is something you can hold someone to. That’s the difference, and it’s why we put the coverage terms in the written scope alongside the price.
Our technicians bring up to 22 years of experience to each job, and every technician who walks through your door is background-checked and uniformed. You know who’s coming before they arrive.
Repair the Boxes or Replace Them? A Vallejo Decision Guide
Refacing makes sense when the existing boxes are structurally sound, plumb enough to shim, and free of active moisture damage. If we find soft particle board, active mold in the substrate, or boxes that need full replacement, we’ll say so before the job starts rather than after. Replacement runs $4,000 to $13,000 for cabinet installation in Vallejo, so the decision is a real one, and we give you both numbers in writing.
If your refacing project is part of a broader remodel, our general contracting and whole-home work runs through the same process: documented scope, background-checked technicians, and a written price that doesn’t move.
FAQs
Refacing kitchen cabinets in Vallejo typically costs $4,000 to $13,000 for the refacing scope itself, and $14,000 to $45,000 when bundled into a full kitchen remodel. The wide range reflects substrate condition, wall plumb, and Heritage District cabinet depths more than door style. Call (844) 560-4789 for an exact quote; estimates are free.
Yes, and we do it often, but the scope has to account for what’s behind the doors. Prewar homes near Mare Island and Old Town frequently have original fir boxes, moisture-affected particle board from later remodels, or cabinets built to non-standard 11 to 12 inch depths. We inspect the substrate and wall plumb before quoting so the written scope reflects the real job. Call (844) 560-4789 to schedule a free estimate.
It holds up if the box substrate is dry and stable at installation. Vallejo’s foggy summers and wet winters keep moisture in raised-foundation wood longer than inland markets, so a box that’s absorbed moisture can release a new veneer skin over time. We inspect for moisture and recommend a dehumidification or remediation period in the written scope if needed. The 365-Day Done Right Promise covers delamination within the guarantee window. Call (844) 560-4789 for a free walkthrough.
Refacing usually costs less than replacement when the boxes are solid. Refacing runs $4,000 to $13,000 in scope; full cabinet installation runs $4,000 to $13,000 as well, but shifts labor into tear-out and new box fitting. The real answer depends on your substrate condition, which is why we put both numbers in writing before you decide. Call (844) 560-4789 for a free estimate.
Refacing in Vallejo doesn’t have to be a guessing game. We inspect the boxes, price the prep honestly, and put the whole scope in writing before any work starts. If you’ve been burned by a no-show or a surprise invoice, this is where that pattern stops. Call (844) 560-4789 for a free estimate and a written price you can hold us to. Live person, 24/7. We also handle home remodeling projects beyond the kitchen when you’re ready.
Written by the team at Bradford Remodeling Co Vallejo, serving Vallejo, CA.
What Our Customers Say
"Respectful crew. Covered the floors and swept every day."
- Jackie T."Primary bath redo. Tile is straight, shower pan was flood tested, and the vanity fits perfectly."
- Tricia S."Great work. Countertop install slipped by a week, but they explained and kept us informed."
- Nora L.












