







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Moraga, CA
We provide independent PGT service across Moraga: repair, replacement, and new installation of PGT windows and sliding doors on the town’s ranch homes, split-levels, and hillside customs. What makes our PGT work different here is that we treat every opening as a fire-rated assembly question and a hillside flashing question at the same time, because on Moraga lots those two things decide the whole job. PGT WinGuard units hold up well when they’re specified and anchored for the exposure they actually face. We’re independent, not a factory dealer, so our recommendation follows your wall and your permit file, not a sales program. Call (844) 560-4789 to schedule a free estimate.

Why Moraga Residents Choose Us for PGT Service

Moraga is a small, affluent, largely built-out Lamorinda town. Almost every project is a remodel, addition, ADU, or rebuild on an existing lot, and the exterior openings stop more of those projects than any other single line item. Owners here have usually gotten one bid that quietly skipped the fire rating and one that priced windows without pulling a permit. We work in the middle of that: an independent contractor who knows PGT WinGuard aluminum and vinyl lines, the Premier Aluminum Series, and Solarban low-E glass, and who sequences window and door work inside Moraga Municipal Code design review instead of around it.
Parts matter as much as labor. We specify PGT-sourced or exact-match replacement IGUs, rollers, weatherstripping, and hardware, and we verify anchor condition before we promise a repair will hold. Our technicians have up to 22 years of experience, and every job gets a written price before work starts. Finished work carries the 365-Day Done Right Promise: if it fails inside a full year, we come back and correct it at no charge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Solve in Moraga
Moraga’s hot, dry summers and wet winters do specific things to PGT assemblies. These are the calls we get most.
- Fogged dual-pane glass on west- and south-facing units. After several summers of full afternoon sun, the IGU seal fails and condensation sits between the panes. The frame is usually fine, so a matched replacement IGU is the sensible spend rather than a whole window.
- Sticking, dragging PGT WinGuard sliders. Roller and track wear plus compressed weatherstripping, accelerated where the door sits in hillside wind exposure and gets opened daily. New rollers and a weatherstrip kit restore most of these.
- Perimeter sealant and flashing breakdown at the frame-to-stucco joint. This is the one that causes real damage. Winter rain finds the gap on a hillside wall and works behind the stucco. Re-flashing and re-sealing the opening is the fix, not a fresh bead of caulk over failing material.
- Clogged drainage weeps on older PGT aluminum units. Debris and wildfire ash pack the weep holes, water backs up in the sill, and the impact laminate edge starts to degrade. Clear weeps plus a laminate and anchor inspection tells you whether the unit still holds its rating.
- Anchor corrosion on units nearing end of life. Where anchors are corroded, laminate has failed, or seals keep going, an honest whole-unit replacement beats a third repair, especially now that Chapter 7A fire-rated assemblies are required in much of Moraga.
PGT Service in Moraga: What Local Conditions Mean for Your Equipment

The single fact that shapes every PGT job here is this: Moraga’s hillside and canyon lots, particularly the steep parcels off Moraga Road and Canyon Road, sit in wildfire-exposure zones where exterior openings have to meet Chapter 7A fire-rated assembly requirements. That changes the conversation. A PGT replacement or addition in Moraga often means upgrading glazing, frames, and exterior hardware to a rated assembly rather than matching what the house was originally built with. Expansive clay and slide-prone soils on those same lots also mean newer foundations and retrofits, and window anchoring gets checked against that work.
On a typical Moraga ranch or split-level, a PGT WinGuard slider or fixed unit shows fogged dual-pane glass, a dragging roller, or sealant pulled away from the stucco after a wet winter. The usual cause is IGU seal failure plus worn rollers and failed perimeter flashing, not a structural problem. A qualified local pro verifies frame and anchor condition, orders a matched IGU or roller and weatherstrip kit when the frame is sound, re-flashes and seals the opening, and recommends full-unit replacement when the frame, impact laminate, or anchor corrosion no longer holds a rating.
PGT Models & Products We Service in Moraga
We work on PGT WinGuard Aluminum and WinGuard Vinyl impact-resistant windows and sliding glass doors, the non-impact PGT Premier Aluminum Series, and Solarban low-E insulated glass units in WinGuard frames. We don’t claim local stock. Replacement IGUs, rollers, weatherstripping, and hardware are sourced per job as PGT-sourced or exact-match parts, and we confirm lead times in writing before you commit. Our stance on repair versus replace is plain: sound frame and intact impact rating gets repaired. Corroded anchors, failed laminate, or repeated seal failures get a written case for replacement, and you decide with the numbers in front of you. You can read more about our PGT service capabilities before you call.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Moraga

Ranges for the work we handle most in Moraga:
| Service | Typical range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Home Addition | $45,000 – $130,000 |
What moves the number: unit count and size, impact versus non-impact glazing, whether Chapter 7A rated assemblies are required at your address, anchor and flashing condition, access on a hillside lot, and design review or geotechnical work your project needs. A free estimate includes an on-site inspection of frames and anchors, a written line-item price, and a clear statement of what the 365-Day Done Right Promise covers. Nothing moves at the door. Call (844) 560-4789 for an exact quote on your Moraga windows.
Serving Moraga, CA – Our Local Coverage Area
We serve Moraga and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Moraga
Often yes, when the frame is sound and the impact rating is intact. A failed IGU seal, worn slider rollers, or compressed weatherstripping can be fixed with matched parts. Corroded anchors, degraded laminate, or repeat seal failures usually make replacement the better spend. Call (844) 560-4789 and we’ll tell you which side of that line your unit is on.
In the town’s wildfire-exposure zones, exterior openings generally have to meet Chapter 7A fire-rated assembly requirements. Your address, parcel, and the design review file determine what applies, and we sequence that review into the scope rather than after it. Call (844) 560-4789 for a free estimate that starts with your exposure zone.
Almost always worn rollers and track wear, plus compressed weatherstripping and failed perimeter sealant at the frame-to-stucco joint. Hillside wind exposure and daily use speed both up. Leaks in particular point at flashing, not the door itself. Call (844) 560-4789 to get the opening inspected before winter.
Many Moraga projects do, because the town runs strict design review on exterior changes, and hillside, slope, creek, and tree ordinances can add conditions. We build that review into the schedule from the start. Call (844) 560-4789 for a free estimate that accounts for it.
Yes, and it’s usually the right time to do it. New openings on an addition or ADU can be spec’d as rated PGT assemblies from the start, which is cheaper than retrofitting later. That work often pulls in foundation and soils engineering on Moraga’s clay lots. Call (844) 560-4789 for a free estimate.
Service Areas Near Moraga
We take PGT window and door work across the Lamorinda area and the towns around it, including Walnut Creek, Lafayette, Pleasant Hill, Martinez, and Benicia. If you’re nearby and unsure whether we cover your street, call and ask. Read more about our Moraga service area, and see the PGT pages for Walnut Creek and Lafayette for what’s typical in those towns.
Book Your PGT Service in Moraga Today
Whether it’s a fogged WinGuard unit, a slider that won’t roll, or a full window package for an addition, we’ll give you a written price before any work starts and back it with the 365-Day Done Right Promise. Call (844) 560-4789 for a free estimate. A live person answers around the clock. We can often schedule assessments quickly when a leak is active.
Written by the team at Bradford Remodeling Co Vallejo.












