







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Home Additions & ADU: The Vallejo Owner’s Guide
We build Schluter-system home additions and ADUs in Vallejo from $45,000 to $130,000 for an addition and $90,000 to $220,000 for a detached or attached ADU, including the waterproofing layer the Schluter system is built around. The part that fails first is almost never the tile or the framing – it’s the membrane, the drain flange, or the band that was installed against Schluter’s spec. Owners usually find out the hard way: a soft spot at the shower curb in a new ADU bathroom, grout that turns dark and stays dark, or a call from the tenant in the converted garage. We’re an independent contractor in Vallejo, not affiliated with Schluter. We install to their published details and pull the permits to match. Every price we quote comes in writing before a tool comes out.

Which Schluter Models This Applies To
Schluter’s waterproofing family breaks into a few lines that matter for additions and ADUs in Vallejo. KERDI-BOARD is the foam backer panel that carries the vapor and waterproof layer in one board, and it’s what we use on shower walls and wet-area ceilings in most of our ADU builds. KERDI membrane and KERDI-BAND handle the seams and floor pans. KERDI-SHOWER kits come in tray sizes from 32×60 up to 72×72 inches, and the drain flange sizes are fixed – the KERDI-DRAIN and KERDI-LINE flanges fit specific pipe and grate profiles. The gotcha we see most often in Vallejo: the rough-in pipe is centered to 16 inches from the wall out of habit, and the KERDI-SHOWER tray is centered, so the drain lands off by four inches and the pan can’t be used without re-plumbing.
- Identify the line first: KERDI-BOARD, KERDI membrane, KERDI-BAND, KERDI-SHOWER, DITRA-HEAT for floor heating, or the SHOWERPROFILE and DILEX trim pieces.
- Read the printing on the panel edge – Schluter stamps the line and panel thickness on the backer.
- Measure the tray footprint and the drain position before ordering. A 48×48 tray is a real size, but if your drain is off-center, it won’t fit.
- OEM Schluter panels and bands are worth the premium on wet areas. Aftermarket copies exist and they cut the fleece weight, which is exactly what the thinset bonds to.
- Where aftermarket makes sense: trim profiles and some grate covers. Not membranes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Home Additions & ADU Is Failing
- Dark grout lines that won’t scrub out. Water is getting past the tile and into the setting bed because the KERDI-BAND seam was overlapped less than the 2-inch minimum or was installed on dry thinset. Dark grout is the first visible warning of a hidden leak.
- A soft or spongy floor at the shower curb. The curb was framed in wood and wrapped with KERDI without a Schluter pre-formed curb, and water has been sitting in the wood. By the time a homeowner feels it in Vallejo, the framing is usually gone back to the stud.
- Loose tile with a hollow sound. The thinset was mixed too stiff or the KERDI-BOARD was not primed where the manufacturer calls for it, so the tile is bonded to the membrane rather than the substrate. Tap with a screwdriver handle and note the hollow spots.
- Water stains on the ceiling below the ADU bathroom. The KERDI-DRAIN flange is the usual culprit – the flange was torqued unevenly or installed without the Schluter sealing washer. Call us before turning the ceiling into a remodel.
- Popcorn or bubbling at the joints between panels. The seam was filled with regular thinset instead of Schluter’s SET or ALL-SET with the correct mix, or band was installed without the right coverage.
Replacement Cost & What’s Included

What a real fix costs in Vallejo depends on how far the water went. Here are the installed ranges we quote, in writing, before any work starts:
| Scope | Installed Price Range |
|---|---|
| Shower pan and KERDI rebuild (one bathroom) | $4,500 – $12,000 |
| Full bathroom remodel with Schluter wet-area assembly | $9,000 – $28,000 |
| Garage conversion to ADU (full scope) | $30,000 – $80,000 |
| Home addition (framing through finish) | $45,000 – $130,000 |
| ADU construction, attached or detached | $90,000 – $220,000 |
What drives the top of the range: slab or pier foundation work, the plumbing rough-in moving to meet a Schluter tray, and the number of wet areas in the ADU. What keeps it at the bottom: keeping the existing rough-in, using a standard KERDI-SHOWER size, and pre-ordering the Schluter parts before demolition. Every project carries the 365-Day Done Right Promise – a full-year written guarantee that if the work fails inside that window, we come back and correct it at no charge. We also install and price KraftMaid, Cambria, and Silestone as part of these projects, so the full scope is quoted together rather than in separate surprises.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this is safe to check yourself. You can pull a ceiling access panel and look for staining, press a screwdriver handle against tile to hear hollow spots, and read the stamp on the KERDI-BOARD panel edge in a closet or under a vanity. What you shouldn’t do yourself: cut into a live shower pan, tear out a curb, or re-set a KERDI-DRAIN flange. The membrane has to be continuous; one wrong slice and the whole assembly leaks. Water damage in a Vallejo ADU also runs into framing and electrical before it shows up, and we’ve seen more than one “quick fix” turn into a gut. If you’ve found a sign on the list above, call us at (844) 560-4789. Estimates are free, the price comes in writing, and a live person answers day or night.
FAQs

Installed to spec, a KERDI shower assembly should hold 30 years or more – but in Vallejo, the number that matters is the installer’s overlap and coverage, not the membrane. We’ve replaced 8-year-old pans that failed on a single seam and we’ve seen 25-year-old KERDI still tight. Vallejo’s damp winters and warm summers cycle the framing, so a correctly installed membrane is what keeps the pan from moving with the wood.
Sometimes yes, and we’ll tell you honestly when a repair makes sense. A single failed KERDI-BAND seam at a curb can be cut out, dried, and re-banded without a full pan rebuild – that’s a smaller job. Once the pan is soft or the drain flange is leaking, the fix is a rebuild. Call (844) 560-4789 to schedule a free estimate and we’ll tell you which one you’re looking at.
A shower pan rebuild with new Schluter parts runs 4 to 7 working days in most Vallejo homes. A full ADU wet-area rebuild is longer and depends on permit and inspection timing. We’ll put the schedule in writing before we start so you know what’s coming. Call (844) 560-4789 for a written scope and price.
We order Schluter parts to the model and size printed on your existing panel or flange, through authorized distributors, and we confirm the delivery date before we start demolition. We don’t stock parts on a truck and we don’t guess at sizes. If the part you need is backordered, we’ll tell you that up front rather than leave you with an open wall. Call (844) 560-4789 to get the order moving.
Get a Written Price for Your Vallejo Project
If you’ve spotted a failing seam, a soft curb, or a drain flange that’s leaking into the ADU below, call Bradford Remodeling Co Vallejo at (844) 560-4789 for a free estimate. We’ll walk the wet areas, check the Schluter lines against the spec, and put the full scope and price in writing before any work starts. Our technicians have up to 22 years of experience, and every project we finish carries the 365-Day Done Right Promise in writing.
Written by the team at Bradford Remodeling Co Vallejo, serving Vallejo and nearby areas.












