







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Fence Installation: The Vallejo Owner’s Guide
Boral fence installation in Vallejo typically runs $3,500 to $9,000 installed, depending on linear footage, gate count, and whether we’re setting new posts or reusing sound ones. Fence work is planned work, not emergency work, so we schedule it properly and give you a written price before anything starts. Most Vallejo homeowners find us the same way: a gate that drags, a post that leans after a wet winter, or a board that split along the grain. Boral’s composite and stone-coated lines are good products, and they usually fail at the connection points, not the material itself.

Which Boral Models This Applies To

Boral is not a single fence system. They make composite and polymer fence products, and they make stone-coated steel roofing, so the first thing we do on a Vallejo call is confirm we’re looking at the right product line before we quote anything. The part that fails first is almost always the post-to-panel connection: the bracket, the cap, or the fastener, not the panel. Our technicians have up to 22 years of experience, and across that time the one thing that separates a fence that lasts from one that doesn’t is whether the mounting hardware matches the panel’s specified expansion gap.
How to identify the right part
Look for the manufacturer label on the inside face of a panel, usually a small stamped or printed tag near the bottom rail. Measure panel thickness with a caliper, not a tape: composite panels commonly run between 5/8 inch and 1 inch, and a bracket cut for the thinner panel will rattle loose on the thicker one. If there’s no label, photograph the post cap and the rail profile and we’ll match it from those.
OEM vs. aftermarket
OEM hardware from Boral is the safe answer when you know the exact model, because the tolerances are set to that panel. A quality aftermarket bracket from a established fence hardware maker works fine when the OEM part is discontinued, and we’ll tell you which one we’re using before we order. We source parts to spec per job; we don’t stock and we don’t carry inventory on the truck.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Fence Installation Is Failing
1. A gate that drags or won’t latch
Hinge sag almost always traces back to a post that moved, not a hinge that wore out. In Vallejo, a wet winter on clay-heavy soil will do that to a post set too shallow.
2. Posts leaning after rain
Look at the base of the post. If the soil has pulled away from one side, the post footing wasn’t set below the local frost depth or packed properly. Composite panels are heavier than wood, so the footing load is higher than most homeowners expect.
3. Boards cracked at the fastener
Composite and polymer panels crack at screw holes when the installer overtightened the fastener or skipped the pilot hole. Cracks run along the grain and open further with each temperature swing.
4. Loose or missing post caps
The cap is your first line of defense against water tracking down into the post core. A missing cap on a composite post is a slow-motion failure that shows up two or three seasons later.
5. Fading or chalking on the sun-facing side
Vallejo summers push UV hard on south- and west-facing panels. Even the better composite formulations chalk and lighten over time. That’s cosmetic, not structural, but it’s worth knowing which one you’re looking at before you decide to replace.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Most Vallejo Boral fence installation projects land between $3,500 and $9,000. That range covers both small repair-and-replace jobs and full fence runs, and what moves you up or down is linear footage, gate count, post replacement, and site access.
| Line item | Typical range |
|---|---|
| Post replacement (each) | $150 – $450 |
| Panel replacement (per section) | $250 – $600 |
| Gate hardware rebuild | $200 – $500 |
| Full fence run (installed) | $3,500 – $9,000 |
Every job gets a written price before any work begins. No numbers move at the door. Your completed install is covered by the 365-Day Done Right Promise: if the work fails within a year, we come back and correct it at no charge. Parts and labor are itemized separately on the quote so you can see what you’re paying for.
DIY or Call Us?
Some things you can safely check yourself. Walk the fence line and flag any post that moves when you lean on it. Look for cracks, missing caps, and rust on fasteners. Photograph the manufacturer label if you can find it, because that saves us a step.
Where DIY goes wrong is post setting. A fence post needs to be set below the local frost depth, packed correctly, and aligned plumb with the neighboring posts or the whole run stresses. Get that wrong, and even good panels will fail inside a season. It’s not dangerous in the way electrical or a garage-door spring is, but it’s a fast way to waste the panel material you just bought.
Call (844) 560-4789 and we’ll look at it with you. We’re an independent service provider, not affiliated with Boral, and we’ll tell you plainly whether you need a repair or a full replacement.
FAQs

Plan on 15 to 25 years for the fence itself. In Vallejo, the post footing is what decides which end of that range you hit, because clay soil and heavy winter rain are harder on the footing than the panels ever see.
Yes, and often you should. A single failing post or section is a repair, not a replacement, and we’ll tell you when that’s the honest answer. Call (844) 560-4789 for a free estimate.
A single post or gate rebuild is usually a few hours. A full fence run in Vallejo is typically two to four days depending on footage and site access. We schedule properly and we don’t promise same-day work on planned installs.
We order to the exact spec of your model after we confirm the label or measure the panel. Every part is noted on the written quote so you know what’s going in and what it’s guaranteed against. Call (844) 560-4789 to get started.
We install Boral-compatible fence work across Vallejo alongside the other documented brands we work with, including KraftMaid, Cambria, and Silestone. Call (844) 560-4789 for a free estimate. A live person answers, and you’ll have a written price before any tool comes out.
Written by the team at Bradford Remodeling Co Vallejo, serving Vallejo and nearby areas.












