







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Fence Installation: The Vallejo Owner’s Guide
Fence installation for a CWS property in Vallejo typically runs $3,500 – $9,000 installed, depending on fence type, linear footage, and site conditions. We install fence to the specs a CWS line calls for, with a written price before any work starts. Most owners don’t think about their fence until something fails: a gate sagging in the wet season, posts leaning after winter rain, boards cupping along a sun-baked run facing the Carquinez Strait. In Vallejo’s marine-influenced climate, that failure usually shows up faster than owners expect. We’ll get to what drives the cost and what fails first.

Which CWS Models This Applies To

CWS (Concrete Wall Systems, not to be confused with unrelated fence manufacturers that use similar initials) builds modular block and panel fencing under a single spec family, so the field work follows the system drawing rather than a generic fence layout. The critical detail is the post-and-panel module spacing: get that wrong and every panel after the first is misaligned. On a Valljoe lot with any slope, that spacing error compounds.
Before calling anyone, find your property’s fence documentation: the permit drawing or the HOA architectural approval packet. The model or system reference number is on that sheet, along with module dimensions, embedment depth for posts, and any required corner or gate post block. If you don’t have the paperwork, a tape measure and a level tell you a lot: measure one panel module center-to-center, then measure your post embedment by digging a small test hole at a post base.
The OEM-versus-aftermarket decision matters here. CWS-specific cap blocks, corner blocks, and gate hardware aren’t stocked by generic fence suppliers, and a near-match block from a different system can fail the interlock pattern. Exact-spec replacement blocks are the only shortcut that doesn’t cost more later in rework.
We’re an independent installer and we’re not affiliated with CWS. We’ve worked with enough CWS spec documentation to read what the drawing requires and build to it. We also work with KraftMaid, Cambria, and Silestone on interior scopes for Vallejo homeowners who want one contractor for multiple jobs.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Fence Installation Is Failing
Each of these points to a specific cause, not just normal wear:
- Panels leaning in one direction. Post footings weren’t set to required depth for Vallejo’s expansive clay soils, which swell after rain and move the post. A lean in one consistent direction signals footer failure, not a panel problem.
- Blocks or cap units shifting, lifting, or rocking. The interlock pattern has opened, usually from a missing or substituted corner block. Once one module separates, adjacent modules carry loads they weren’t designed for, and the gap spreads.
- Gate dragging on the ground or failing to latch. Gate posts take far more load than run posts, and a gate post that wasn’t embedded to spec or specified with the correct heavy-duty block is the most common failure on a CWS installation. A sagging gate strains the hinge blocks, which then crack.
- Water pooling at the base of posts after storms. Grading around the run wasn’t adjusted at installation. In Vallejo’s wet winters, water sitting against post footings accelerates soil movement and footing deterioration. This one often looks fine until the second or third season.
- Cracks running through block faces or mortar joints. Thermal movement over Vallejo’s hot, dry summers expands and contracts the fence along a long run without enough relief. A run exceeding the system’s recommended linear length between expansion joints cracks at the joints, starting at the block face.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Fence installation in Vallejo runs $3,500 – $9,000 installed. What puts you at one end or the other:
- Linear footage. A short 40-foot run is near the bottom; 100 feet or more moves toward the top.
- Old fence removal and haul-away. Concrete-footed posts and block panels are heavy and take time to remove cleanly. That disposal and labor shows up on the line-item.
- Post footing depth and soil. Expansive clay soils or hillside grading may require deeper embedment and more concrete per post.
- Gates. A gate installation is priced separately and carries its own hardware and heavier footing requirement.
- Permit and inspection. CWS fence projects that touch property lines or HOA design review have permit costs and inspection scheduling that fold into the total.
Our written price covers parts and labor as separate line items. You see what the parts cost and what the installation costs. Nothing shifts at the door. Every completed installation carries our 365-Day Done Right Promise: if the work fails within a year, we return and correct it at no charge.
DIY or Call Us?
You can safely do a visual inspection: walk the run, note where it leans, measure the panel module, check that your gate swings and latches. You can photograph failures for your records. What goes wrong on DIY for CWS fence is the post footing: getting embedment depth, concrete mix, and cure time right for Vallejo’s clay soil takes experience most homeowners don’t have from a weekend project. A post set shallow will look fine for one dry season and fail in the first wet winter. Gate post installation is the other trap. A gate post carrying one point of concentrated hinge load needs heavier footing and the correct CWS block type; a lighter approach sags within weeks and cracks the hinge blocks.
If your gate has already dragged and damaged the hinge-side blocks, or if the run is leaning in a pattern, that’s beyond visual inspection. Call us at (844) 560-4789 for a free estimate. We’ll tell you honestly what can be corrected and what needs a full rebuild.
FAQs

A correctly installed CWS fence with proper footings lasts 25 to 30 years in most climates. In Vallejo specifically, the cycle that shortens that lifespan is wet winter followed by dry summer: clay soil expands and contracts, and a footing that wasn’t set to full embedment depth moves first. Get the footing right and 25-plus years is a realistic expectation; get it wrong and you’ll see lean within five.
Sometimes, yes. If the posts and footings are sound and one gate hinge block has cracked or one module has shifted, targeted repair is cheaper than replacement. What doesn’t repair well: a run that’s leaning consistently in one direction (footing failure) or blocks multiplying cracks across a long run with no expansion joints. We’ll tell you on inspection which category you’re in.
A straight residential run of 50 to 80 feet typically takes one to three days for a crew, depending on old-fence removal, footing depth, and whether the gate is included. Scheduling goes on a planned build calendar, not same-day service. Call (844) 560-4789 and we’ll give you a date range and a written schedule with the estimate.
We identify the exact model and module spec from your documentation or by field measurement, then source from CWS-spec suppliers. We don’t carry CWS parts on a truck and we don’t stock them; parts are ordered to your spec once the scope is confirmed, which is one reason a written quote comes before scheduling. If the drawing is missing, we’ll figure out the spec from the site before pricing.
Call (844) 560-4789 to schedule your free estimate. Every price comes in writing before any work starts.
Written by the team at Bradford Remodeling Co Vallejo, serving Vallejo and nearby areas.












