







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Kitchen Remodeling: The Vallejo Owner’s Guide
Mr-Glass-compatible kitchen remodeling in Vallejo typically runs $14000 – $45000 for a full kitchen, with cabinet installation at $4000 – $13000, countertops at $2000 – $6500, and a backsplash at $800 – $2500. We’re an independent remodeling contractor, not affiliated with Mr-Glass, and we write the price down before any work starts. Most owners don’t go looking for this work. They find it: a cabinet door that won’t sit flush, a countertop seam that keeps catching a fingernail, a drawer front that has started to separate from the box. Once one piece lets go, the rest of the kitchen tells you what’s coming.

Which Mr-Glass Models This Applies To

Kitchen work isn’t a single part with a model number stamped on it, and that’s the first thing to get straight. What matters for a Mr-Glass kitchen is the cabinet line, the door style, and the surface material, not a serial plate. Pull the door off a base cabinet and look at the back: the manufacturer label, the line name, and the finish code are usually printed on a strip inside the box or on the door’s hinge side. Photograph it before you measure anything.
Measurements decide the rest. Scribe the cabinet box width, height, and depth in sixteenths, not eighths – box sizes can drift a fraction inch between production runs, and that fraction is what makes a replacement door rattle or a new drawer front bind. If you’re matching an existing door, note whether it’s a slab, shaker, or raised panel, and whether the overlay is full or partial, because the hinge bore and the reveal both change with it.
The OEM-versus-aftermarket call is where budget lives. Factory-matched Mr-Glass doors and fronts keep the finish and grain consistent across the room; a quality aftermarket equivalent in the same species and sheen can bring cabinet installation down toward the lower end of the $4000 – $13000 range, but the finish match is the gamble. On surfaces, a documented replacement in Cambria or Silestone is the safer route than chasing an exact match to a discontinued slab – a close color in a current line reads cleaner than a perfect one that arrives cracked. We also service KraftMaid and Cambria kitchens where owners want the two brought into line.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Kitchen Remodeling Is Failing
- Doors that won’t stay flush. Usually a blown-out hinge screw or a swollen particleboard core from a slow leak under the sink. In Vallejo’s damp winter months, a cabinet box that took on water in January will show it by spring.
- Drawer fronts separating from the box. The screws have pulled or the glue joint has failed; a drawer that carries pots and pans loads that joint every single time it opens.
- Countertop seams catching a fingernail. The epoxy in the seam has shrunk or the substrate under it has flexed. Left alone, water works into the seam and stains the core.
- Caulk lines at the backsplash cracking. Normal movement between the wall and the cabinet run, or a backsplash that was set without a proper gap at the counter. Recaulking hides it for a season; it doesn’t fix it.
- Soft or spongy floor in front of the sink. The substrate under the finished floor has taken on moisture. This one is worth checking early – a soft spot is a repair, a rotted subfloor is a remodel.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Vallejo homes, here’s what the work runs, installed, with the parts and labor together in one written figure:
- Full kitchen remodel: $14000 – $45000
- Small kitchen remodel: $9000 – $20000
- Cabinet installation: $4000 – $13000
- Countertop installation: $2000 – $6500
- Backsplash installation: $800 – $2500
- Kitchen island installation: $3000 – $10000
What moves you inside a range: the cabinet line and door style, the surface material (a Cambria or Silestone slab costs more than a laminate top and lasts far longer), whether the rough-in has to move for a new sink or range, and how much of the old kitchen has to come out before the new one goes in. Every one of those is quoted in writing before we start. No numbers that move at the door. All completed work carries the 365-Day Done Right Promise: if it doesn’t hold within a year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself. Photograph the cabinet label. Measure the box. Feel for soft floor in front of the sink. Test a hinge by tightening the screw a quarter turn. That’s diagnosis, and it’s useful.
The rest is where DIY goes wrong. Hanging cabinet boxes plumb and level across a run, cutting a countertop opening for a sink so the edges don’t chip, setting a backsplash so the grout lines stay true over a bowed wall – each of those needs the right tools and a second set of hands, and a mistake means buying the material twice. There’s no dangerous component here the way there is with electrical or gas, but there is plenty of expensive material and a kitchen you have to live in while it’s torn apart. Call (844) 560-4789 and we’ll give you the range and the written price before anything comes out of the box.
FAQs

A well-installed kitchen with documented materials should hold 15 to 25 years, but Vallejo’s damp winters are the variable. Cabinets near a sink or an exterior wall take on moisture seasonally, and the first thing to show it is the finish at the base of the door. Keeping the caulk at the backsplash fresh and fixing a slow leak the week you find it buys years.
Often yes. A hinge can be re-bored and reset, a drawer front re-glued and re-screwed, a countertop seam re-epoxied. Repair makes sense when the box and the finish are sound and one piece has let go. Once the substrate is soft or the finish is flaking along the whole run, repair is a patch over a bigger problem, and replacement costs less over ten years.
A cabinet-only swap runs three to five working days; a full kitchen with new counters and backsplash runs two to four weeks, depending on whether the rough-in moves. We give you the schedule in writing with the price, so you know what day the kitchen is usable again.
We work from a documented roster of name-brand materials – KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone surfaces, Kohler and Moen fixtures – so every specification is traceable and carries the manufacturer’s own warranty behind ours. We match your existing line where it’s still in production and quote the closest current equivalent, with the reason, where it isn’t. Call (844) 560-4789 for a free estimate.
Written by the team at Bradford Remodeling Co Vallejo, serving Vallejo and nearby areas.












