







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Windows & Doors: The Vallejo Owner’s Guide
We install Unilock-compatible windows and doors for homeowners across Vallejo, and full window replacement typically runs $4,500 to $15,000 installed, with impact-rated units from $8,000 to $25,000. Door and window part work is a planned job, not an emergency call, so we schedule it with a written price in hand before any tool comes out. Most owners find out something’s wrong the same way: a draft that wasn’t there last winter, a sash that won’t sit flush, or condensation fogging the glass from the inside. One failed component – a balance, a hinge set, a sill pan – is usually behind all of it.

Which Unilock Models This Applies To

Unilock window and door lines are matched by series, not by the sticker on the frame. The part that fits one series often won’t seat in another because the balance channel depth, the hinge spacing, and the sill profile change between product generations. Before we order anything, we pull the label from the sash edge or the operable panel jamb – it carries the model and series code – and we measure the rough opening, not just the visible glass. In Vallejo homes, especially in the older stock around the waterfront and Mare Island, we regularly find replacement units installed decades apart, so one window can be from a different series than the one two feet away.
On OEM versus aftermarket: for Unilock-specific hardware like proprietary balances and hinge sets, we use factory parts when they’re available, because the aftermarket equivalents don’t always match the tension spec. For standard items – weatherstripping, sweeps, sill pans – quality aftermarket is a fair call and often more cost-effective. We tell you which side of that line each part falls on.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Windows & Doors Is Failing
- Drafts at the perimeter. Usually failing weatherstripping or a compressed sill gasket. You’ll feel it first on the windward side of the house.
- A sash that won’t stay up. The balance spring has lost tension. This is common after a decade or more of use, and it’s a wear part, not a defect.
- Fogging between the panes. The sealed glass unit has failed and moisture is inside. No amount of cleaning fixes it; the unit has to be replaced.
- Sticking or scraping at the hinge. The hinge set is worn or the frame has shifted. Left alone, it wears the sash edge and gets more expensive.
- Water at the interior sill after rain. The sill pan or drainage path has failed. This is the one to catch early – Vallejo’s wet winters will find a bad sill fast, and water that walks into the wall cavity does real damage.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Vallejo owners actually pay, installed, with parts and labor broken out in a written line-item quote:
| Scope | Installed Price Range |
|---|---|
| Window replacement (full unit) | $4,500 – $15,000 |
| Impact-rated window installation | $8,000 – $25,000 |
What moves the number: the count of openings, whether it’s a full-frame replacement or a pocket swap, the series availability of the part, and whether impact-rated glass is specified. On the low end you’re replacing a few units with standard glazing; on the high end you’re doing most of the house in impact glass. Every quote is a written price before work starts – no numbers that move at the door. The work itself is covered by our 365-Day Done Right Promise: if it doesn’t hold within a full year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things: open and close each sash and listen for scraping, run a hand along the perimeter on a cold day for drafts, and look between the panes for fogging. What you shouldn’t attempt is resealing a failed glass unit, re-tensioning or replacing a balance, or pulling a window to address a sill pan. Those involve the sealed unit and the structural opening, and a mistake there means water in the wall – the kind of damage that turns a small part job into a bigger one. Give us a call at (844) 560-4789 and we’ll look at it and give you a written price before anything starts.
FAQs

Glass sealed units typically last 15 to 25 years; balances and hinge sets wear out sooner, often around 10 to 15 years with regular use. Vallejo’s wet winters stress sill and perimeter seals faster than a drier climate would, so drainage paths deserve a check every few years. Call (844) 560-4789 for a free estimate.
Often, yes – a balance, hinge set, or weatherstripping can usually be swapped without replacing the whole unit. A fogged sealed glass unit, though, has to be replaced; the moisture is inside and can’t be removed. Call (844) 560-4789 and we’ll tell you honestly which it is.
A single part like a balance or hinge set is a short job. A full window replacement depends on the count of openings and whether it’s a pocket or full-frame swap. We’ll give you the timeline in the written scope before work begins.
We order by the series code from the label on your sash or jamb, and we confirm the spec before it ships. We don’t claim to stock parts or carry them on a truck – the right part is ordered to your unit. Call (844) 560-4789 to start.
Written by the team at Bradford Remodeling Co Vallejo, serving Vallejo and nearby areas.












