







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Home Additions & ADU: The Vallejo Owner’s Guide
We build and install Boral-compatible home additions and ADUs for Vallejo homeowners, with full projects typically running $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached or attached ADU. This page is for owners whose existing Boral-sided addition, garage-conversion unit, or accessory dwelling has started to fail at a specific component: siding that has cupped, an addition wall that weeps at the plate line, a soffit run pulling away from the fascia. You don’t have to guess whether the whole structure is compromised. Most of what we see in Vallejo starts as one failed piece of the envelope and spreads. Below we lay out how to identify what you’re looking at, what replacement actually costs, and where the line sits between a homeowner check and a call.

Which Boral Models This Applies To

Boral’s exterior product line is broad, and the part you need depends on which family was installed on your addition. The most common on Vallejo additions and ADU walls are Boral TruExterior trim and siding (a poly-ash composite, sold in shiplap, nickel gap, and trim boards) and Boral Versetta Stone panels. Each has its own fastening schedule and its own expansion gaps, and the parts are not interchangeable between families. TruExterior trim, for example, needs a specific clearance from grade and from roofline flashing that generic wood trim does not require.
To identify what’s on your wall, look at the back of a loose piece at an inside corner: TruExterior is stamped with the Boral name and often the profile. Versetta Stone has a molded interlocking edge with a nailing fin you can see at a break. Measure the reveal and the board width; a 5/4-by-6 trim board is not the same part as a 4/4-by-6, and ordering the wrong thickness is the single most common error we see on owner-supplied material.
On OEM versus aftermarket: for Boral TruExterior, the OEM part is worth it, because the poly-ash blend is the reason the product performs, and aftermarket “composite trim” often substitutes a PVC or fiber-cement core with different thermal movement. For hidden fasteners and flashing accessories, a quality aftermarket equivalent with the same spec is fine. We’re an independent contractor and not affiliated with Boral; we source the correct part to your model, we don’t manufacture it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Home Additions & ADU Is Failing
- Visible cupping or waviness along a siding run. This is usually moisture behind the panel or fasteners set too tight, preventing the product from moving with temperature. On a Vallejo addition facing the Carquinez Strait wind, that movement is real and the fastening has to account for it.
- Paint or stain peeling in sheets rather than flaking. TruExterior takes paint well when installed correctly; peeling in sheets points to moisture trapped at the back of the board, often from a missing or failed house wrap.
- Water staining at the base plate or interior drywall on an addition wall. The addition-to-existing-house joint is the first place a Boral envelope fails, because the flashing transition there is the hardest one to get right.
- Soffit or fascia pulling away from the ADU roofline. Fastener pull-out from the substrate, not the Boral part itself, is usually the cause, and it exposes the roof edge to water intrusion.
- Visible gaps at panel joints on Versetta Stone. Missing or failed sealant or a missing nailing fin lets water behind the veneer, where it can sit against the sheathing for months before you see it inside.
Each of these has a specific fix at the component level, but the fix only holds if the underlying cause (fastening, flashing, or moisture management) is corrected. Replacing the failed piece without correcting the cause is the most expensive mistake we get called back to fix.
Replacement Cost & What’s Included

Replacement costs in Vallejo depend on how much of the envelope is affected and whether the substrate behind it is sound. We give you a written price before any work starts, and that price doesn’t move at the door.
| Scope | Typical Installed Range |
|---|---|
| Envelope repair on an existing addition (siding, trim, flashing correction) | $3,500 – $9,000 |
| Home addition (full construction) | $45,000 – $130,000 |
| ADU construction (attached or detached) | $90,000 – $220,000 |
| Garage conversion to living space | $30,000 – $80,000 |
What drives the range on an addition or ADU: foundation type, whether the site needs grading or a retaining wall, the number of windows and doors, and the exterior product spec. What drives the range on an envelope repair: how much of the substrate has to be replaced, and whether the flashing at the addition-to-house joint has to be redone. All completed work is covered by our 365-Day Done Right Promise: a written guarantee that if the work fails inside twelve months, we return and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
What a homeowner can safely check: measure the board width and reveal, photograph the back of a loose piece, and look for water staining on the interior drywall at the addition-to-house joint. Those three things tell us what part family you have and how far the moisture has traveled. That’s a real head start, and we’re glad to work from your photos.
Where DIY goes wrong on a Boral addition is at the flashing and fastening, not the panel itself. A replacement board installed without correcting the house wrap or the transition flashing will look right for one wet season and fail the next, and the interior damage that follows costs more than the original repair. Cutting into the envelope of a load-bearing addition wall or a permitted ADU is also where building department review can be triggered, and that’s a scope question worth getting right the first time. If the failure is on the roof edge or involves the structural connection, don’t open it. Call (844) 560-4789 and we’ll tell you honestly whether it’s a repair or a rebuild.
FAQs

How long does Boral TruExterior siding last on a Vallejo home? Boral publishes a long service life for properly installed TruExterior, and in Vallejo’s marine air the real limit is usually the fastening and the moisture management behind it, not the board itself. When the flashing and house wrap are correct, TruExterior holds up well against the wind-driven rain off the strait. Call (844) 560-4789 for a free inspection and a written estimate.
Can the failing piece be repaired instead of replaced? Sometimes. A localized cupped board or a failed sealant joint can be repaired if the substrate behind it is dry. If the failure has spread along the run or the sheathing is soft, repair won’t hold and replacement is the honest answer. We’ll tell you which you’re looking at before any work starts.
How long does a replacement take? A single-line repair on an addition is typically one to two days on site. A full envelope re-clad on an ADU runs longer and depends on weather, and we’ll put the timeline in writing with the price. Call (844) 560-4789 for a real schedule.
How do you source the part for my specific Boral model? We identify the product family from the back stamp or a finish sample, confirm the profile and thickness, and order the correct OEM or spec-matched part for your wall. We don’t carry parts on a truck; we source to your build. Our technicians have up to 22 years of experience, and we work with a documented roster of name-brand materials, including KraftMaid, Cambria, and Silestone on the interior side. Call (844) 560-4789 and we’ll confirm the part matching for your Vallejo project.
Get a Written Price Before Any Work Starts
Whether you’re looking at a failing siding run on an addition or planning a new ADU in Vallejo, we give you a written price before any work starts, a background-checked and uniformed crew on your job, and a live person on the phone when you call. Bradford Remodeling Co Vallejo is held to The Garrison Standard: the price goes in writing, and the 365-Day Done Right Promise goes in writing with it. Call (844) 560-4789 for a free estimate. We work with KraftMaid, Cambria, Silestone, and a documented roster of name-brand materials across every project, so your spec is traceable from the first estimate to the signed guarantee in your hand.
Written by the team at Bradford Remodeling Co Vallejo, serving Vallejo and nearby areas.












