







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Vallejo Owner’s Guide
Boral makes clay and concrete roof tile, and we install, repair and replace Boral-compatible roof systems across Vallejo. Most roof repairs run $400 – $1,800; a full roof replacement runs $8,000 – $20,000 depending on roof size, pitch and tile type. Call (844) 560-4789 and a live person picks up, any hour, to schedule a free estimate with a written price before any work starts.

Owners usually find a Boral problem after a hard rain, not before. A dark stain spreads across a ceiling in Fleming Hill or on the second floor of a Victorian near the Vallejo waterfront. Or a tile slides loose on a ridge after a windy night and you can see daylight where the underlayment shows. Sometimes a corner of the roof at the eave looks chalky and crumbly, and a contractor tells you the tile has “gone soft.” That’s the moment our phone rings.
Which Boral Models This Applies To

Boral’s roof line splits into two families: clay tile and concrete tile. Clay tile under the Boral banner includes the flat profile and barrel profiles sold through distributors across California, and the concrete side includes the low-profile and high-profile tiles plus the shingle-style flat concrete products. The key compatibility issue is that tile dimensions vary by series, and mixing profiles from different runs creates a joint that won’t sit flush. A 9-inch flat tile and a 12-inch flat tile are not interchangeable on the same course.
Here’s how to identify what you have. Look under a ridge cap or a hip tile for a stamp or a paper label from the manufacturer band. If the label is gone, measure one full tile: face width, overall length and thickness. Bring that to us with a photo of the profile from the side. Boral mints tiles in different runs over the years, and dye lots shift color slightly, especially on the lighter concrete tones. That’s the OEM-versus-aftermarket decision: an original Boral run is the best color match, but a quality compatible tile from a different manufacturer can work structurally if the profile, thickness and lock match. In Vallejo we often find the older concrete tiles are no longer in current production, so a compatible match becomes the practical answer. We’re an independent service provider and not affiliated with Boral, so we walk you through the trade-off rather than steering you toward one outcome.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Roofing Is Failing
Boral tile itself can last 30 to 50 years, but the layers under it fail first. Watch for these five signals:
- Ceiling stains after rain. Water is getting past the tile and through the underlayment, which is the real waterproof layer on a tile roof. A stain means the underlayment is torn, aged out or incorrectly lapped.
- Loose or slipped tiles. Nails corrode and break, or wind lifts a tile and it slides out of course. A missing tile exposes the felt or membrane under it and lets water run lateral across the roof.
- Cracked or broken tiles. Foot traffic, hail or a tree limb will do it. One break is a repair; a cluster suggests the tile batch is brittle or the underlayment has failed and the tiles are shifting on top of it.
- Chalky, crumbling edges at the eave or ridge. This is efflorescence or surface erosion on concrete tile. It’s common in Vallejo’s climate, where marine air and occasional freeze-thaw nights at the north end of town work at the tile surface over decades.
- Musty smell in the attic or a drooping soffit line. Water is trapped in the underlayment layer and hitting the sheathing. This is the signal that a repair has turned into a bigger job.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Roof repair in Vallejo runs $400 – $1,800 for a typical fix like resetting a course of tiles, replacing a ridge cap or patching underlayment. Tile roof repair specifically runs $600 – $2,500 when the work involves matching a discontinued profile or replacing a section of field tile. Full roof replacement, including tear-off and new underlayment under new Boral-compatible tile, runs $8,000 – $20,000. The range is driven by roof square footage, pitch, how many layers of old roofing need removing and whether the sheathing has to be replaced.

What you get in writing is a line-item price before the first tool comes out: tear-off, sheathing repair if needed, new underlayment, tile material, flashing and cleanup. Every project is covered by the 365-Day Done Right Promise. If the repair or replacement fails within that full year, we come back and correct it at no charge.
DIY or Call Us?
Here’s the honest split. You can safely check from the ground or from an attic hatch: look for stains on the ceiling and rafters, photograph the roof from a ladder you don’t climb past the roof edge on, and note where tiles are visibly lifted or missing. That’s it.
Roof work is height work, and the tile itself is fragile underfoot. A tile you step on wrong cracks, and a cracked tile is the start of a leak. The underlayment repair under a Boral course also needs the flashing at the termination reset correctly, or the leak comes back in the first hard rain. This is a job for a trained professional on a properly set ladder with fall protection. Call (844) 560-4789 for a free estimate, and we’ll write the price before we start.
FAQs

A Boral tile itself can last 30 to 50 years, but the underlayment beneath it is what typically fails first, usually somewhere between 15 and 25 years depending on exposure. In Vallejo, the salt air off the waterfront accelerates corrosion on fasteners and shortens the life of the underlayment at the eave. If a tile is 20 years old and the original underlayment is still on it, plan for a replacement window in the next five to ten years regardless of how the tile looks. Call (844) 560-4789 for an exact quote; estimates are free.
Yes, in most cases. A single cracked or slipped Boral tile, a failed ridge cap or a torn section of underlayment can usually be repaired without a full replacement. The exception is when the underlayment has aged out across the whole roof: patching a roof where the membrane is failing everywhere just moves the problem two courses over. We’ll tell you which situation you’re in before we quote. Call (844) 560-4789 for a free estimate.
A typical repair like a tile replacement or a ridge cap fix is a half-day to a full day of work, depending on how many tiles need to be pulled to reach the leak. A full roof replacement on a standard-sized Vallejo home runs several days to a week, and the schedule depends on weather and whether the sheathing needs replacement under the tile. We write the timeline into the estimate so you know what to expect.
We source through roofing distributors that carry Boral and compatible tile lines, and we match by profile, thickness and color before we order. Where the original Boral run is discontinued, we present a compatible alternative and you approve the color and profile in writing before we order. KraftMaid, Cambria and Silestone are among the other product lines we work with on the remodeling side. Call (844) 560-4789 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Vallejo, serving Vallejo and nearby areas.












