







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Home Additions & ADU: The Vallejo Owner’s Guide
We build Cambria-surfaced home additions and ADUs for Vallejo homeowners, and typical installed projects run $45,000 – $130,000 for additions and $90,000 – $220,000 for a full ADU. Cambria isn’t a part that “fails” the way a spring or a valve does; the failures we get called for are surface and assembly problems – a countertop seam that opens over a new slab, a vanity top that cracks at an outlet cutout, a wet-bar surface that stains because it was sealed or supported wrong. Most owners find out during the punch-list walk or the first winter, when a seam in the new addition’s kitchenette catches a fingernail or water pools where the quartz meets the backsplash.

Which Cambria Models This Applies To
Cambria is a quartz surface brand, sold by collection and color name rather than by model number: the current lines include names like Brittanicca, Ella, Torquay, Skara Brae and Berwyn, with the exact name printed on the fabricator’s layout sheet and often on a small sticker on the underside of the slab or the finished edge. Matching a replacement or an expansion surface is where Vallejo owners get caught. Quartz is made in batches, and two slabs of the same color poured months apart can read slightly different in daylight – so for an addition that continues an existing Cambria counter, we pull the original color name and, where possible, the lot, and we set expectations in writing if an exact lot isn’t obtainable. On the OEM-versus-aftermarket question: Cambria is the material, not a mechanism, so “OEM” means the genuine Cambria slab from an authorized fabricator, and “aftermarket” means a look-alike quartz or a porcelain alternative. We install Cambria because the manufacturer spec and warranty travel with the slab, and we’ll tell you plainly when a look-alike makes more sense for a budget ADU kitchenette.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambria Home Additions & ADU Is Failing
- A seam you can feel with a fingernail. Quartz seams are glued and color-matched; if the adhesive has shrunk or the two slabs were set on an uneven substrate, the joint opens a hairline that traps moisture and darkens over time.
- A crack radiating from a cutout. Sink, cooktop and outlet cutouts are stress points. A crack starting at a corner usually means the slab was under-supported or the cutout corner was left square instead of eased, and quartz doesn’t flex to forgive it.
- Staining or a dull ring that won’t wipe off. Cambria is non-porous, so a stain that sets usually means something etched or abraded the finish – a harsh cleaner, a hot pan set down, or a surface that was polished incorrectly during install.
- Water pooling at the backsplash or wall joint. In a new addition, the wall and the cabinet run can settle at different rates; if the caulk joint was grouted instead of caulked, it cracks and water finds the seam.
- A slab that sounds hollow or rocks under hand pressure. That’s a substrate problem, not a surface problem – the plywood or cabinet frame beneath has a high spot or a soft spot, and the quartz is bridging it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Vallejo, replacing or extending a Cambria surface inside an addition or ADU typically lands in these ranges, installed: a countertop run $2,000 – $6,500, a backsplash $800 – $2,500, a kitchen island top $3,000 – $10,000, and a bathroom or kitchenette vanity top $800 – $3,000. What drives the range is slab size and color availability, the number of cutouts and seams, edge profile, and whether the substrate has to be corrected before anything goes down. Every quote is written and line-item before work starts, with the slab, the fabrication, the tear-out and the caulk-and-seal all spelled out. The 365-Day Done Right Promise covers the installation for a full year – if a seam opens or a joint fails inside that window, we come back and correct it at no charge. We’re an independent contractor and not affiliated with Cambria.
DIY or Call Us?
You can safely check a few things yourself: run a fingernail along the seam, press on the slab to feel for rocking, look under the front edge with a flashlight for gaps between quartz and cabinet, and note whether the caulk at the wall is caulk or grout. Where owners get hurt is the next step – pulling a slab to fix the substrate. Quartz slabs run heavy, they chip at the edges when lifted unevenly, and a dropped slab is a several-thousand-dollar mistake plus a safety hazard. Cutting or re-cutting a Cambria top in place for a new sink or outlet is a fabricator job; the dust and the blade are not a homeowner setup. If you’re weighing a repair against a replacement in your Vallejo addition, call us at (844) 560-4789 and we’ll tell you which one the surface actually needs.

FAQs

Cambria quartz carries a manufacturer warranty and, installed over a sound substrate with proper seams and eased cutouts, holds up for decades in a Vallejo home. The realistic failure point isn’t the slab – it’s the install: a seam that wasn’t supported or a wall joint that was grouted instead of caulked. Call (844) 560-4789 for a free estimate on correcting either.
Sometimes. A hairline seam can often be re-glued and color-matched, and a crack at a cutout can sometimes be stabilized if the substrate is corrected first. A crack that runs through the slab, or a surface that’s been etched, usually means replacement. We’ll tell you which one you’re looking at before you spend anything – call (844) 560-4789.
A vanity or small counter swap in an addition is typically a one-to-two-day job once the slab is fabricated; a full kitchen run with cutouts and a backsplash usually runs longer because the template, fabrication and install are separate steps. We put the schedule in writing before work starts. Call (844) 560-4789 for an exact timeline.
We source genuine Cambria through authorized fabricators, match your existing color name and lot where possible, and confirm the manufacturer warranty travels with the material. If an exact lot match isn’t available for an addition that continues an existing counter, we say so in writing up front rather than after the slab is cut. Call (844) 560-4789 to start a free estimate.
If you’re planning an addition or ADU in Vallejo and want the Cambria surfaces done right the first time – written price, documented brand, and a full-year guarantee behind the work – call Bradford Remodeling Co Vallejo at (844) 560-4789 for a free estimate. We also work with KraftMaid, Silestone and Kohler when a project calls for them.
Written by the team at Bradford Remodeling Co Vallejo, serving Vallejo and nearby areas.












