







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Fence Installation: The Vallejo Owner’s Guide
Fence installation with CGI-compatible materials in Vallejo typically runs $3,500 – $9,000 installed, depending on linear footage, fence height, and how much of the old line has to come out first. We install CGI-compatible fence systems to manufacturer spec, hand you a written price before anything gets dug, and back the finished work with our 365-Day Done Right Promise. If your existing fence line has started to lean, rust at the welds, or pull free of its posts, you’ll usually spot it after the first wet winter or a windy March.

Owners usually notice the failure in one of two places: a gate that no longer latches because a post has shifted, or a bottom rail that has rotted where it meets Vallejo’s clay-heavy soil. Both read as small problems. Both get worse fast when the rains come back through the Carquinez Strait. Call (844) 560-4789 for a free estimate and we’ll tell you straight whether you’re looking at a repair or a full fence line.
Key Takeaways
- Installed CGI-compatible fence work in Vallejo: $3,500 – $9,000.
- Written price before work begins. No numbers that move at the door.
- 365-Day Done Right Promise on every completed fence project.
- We’re an independent contractor, not affiliated with CGI.
Which CGI Models This Applies To

CGI covers a wide range of fence systems, and the installation details change with the series. Before we quote, we identify what you actually have: the fence style (ornamental aluminum, welded steel, or a hybrid panel system), the post spacing, and the panel height. If the original paperwork is gone, we measure the post centers and the rail profile on site. That matters because different CGI lines run different post gauges and panel heights, and a match that’s off by an inch shows up as a sagging gate or a gap that won’t close.
The OEM-versus-aftermarket decision is where most owners get stuck. OEM panels and posts match the original finish and profile exactly. Quality aftermarket equivalents can save real money on the hardware and fittings, as long as the gauge matches. We don’t claim to carry CGI parts or stock them on a truck. We source to the spec on your actual fence and we tell you which is OEM and which is a matched equivalent before you commit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Fence Installation Is Failing
- Posts leaning after rain. Vallejo’s clay soil expands and contracts with the wet-dry cycle, and a post set too shallow will shift. Two winters of that and the line is out of plumb.
- Rust blooming at the welds. Salt air off the strait and morning fog speed up corrosion at weld points. Once rust reaches the weld, paint won’t hold it.
- Bottom rail rot or soft wood. Where a fence rail sits in low ground that stays wet, the wood wicks moisture. Feel it with a screwdriver – if it sinks easily, the rail is gone.
- Gate drag and latch failure. A gate that scrapes or won’t catch means the post has moved, not just the gate hinge. Fixing the hinge alone won’t hold.
- Panels pulling free at the fasteners. Wind gusts through the Napa River corridor work the fasteners loose over time. Loose panels rattle, then bend.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed CGI-compatible fence pricing in Vallejo lands in the $3,500 – $9,000 range. A single-line repair sits near the low end; a full run replacement with new posts, setting in concrete, and removal of the old line moves toward the top. What drives the number: total linear feet, fence height, post setting depth for clay and slope, gate count, and gate hardware. We give you a written line-item price before any work starts. Nothing moves after that.
| Scope | Typical Installed Range |
|---|---|
| Single section or gate repair | $3,500 – $5,000 |
| Partial run replacement | $5,000 – $7,500 |
| Full line replacement with new posts | $7,500 – $9,000 |
Every finished fence project carries the 365-Day Done Right Promise. If the work fails inside that window – a post lifts, a weld cracks, a gate stops latching – we come back and correct it at no charge. Written guarantee in your hand at close.
DIY or Call Us?
You can safely check a few things yourself: walk the line and look for leaning posts, press a screwdriver into the bottom rail, and lift each gate to see if it drops or drags. That tells you the scope. What you shouldn’t take on is resetting posts in Vallejo’s clay or re-hanging panels on a fence that has already moved. Setting a post to the right depth for this soil and slope is the whole job, and a post set shallow will lean again inside two winters. Panels installed out of square stress the fasteners and shorten the life of the line. Call (844) 560-4789 and we’ll give you the honest read and a written price.
FAQs

A properly installed CGI-compatible fence line typically lasts 15 to 25 years in this climate, with the shorter end applying to wood rails in low, wet ground and the longer end to metal systems with galvanized or coated finish. Salt air near the strait and the wet-dry clay cycle are the two things that cut lifespan here. Call (844) 560-4789 for an exact quote – estimates are free.
Often yes. A single failed post, a bent panel, or a failed gate latch can usually be corrected without touching the full line. What decides it is how much of the fence has already moved – if posts are leaning along the whole run, piecemeal repair won’t hold. We’ll tell you which one you have.
A single repair or gate fix is a short job, usually done in an afternoon. A full run replacement typically takes one to three days, depending on footage, gate count, and how much old fence has to come out. Call (844) 560-4789 for a written price before anything is scheduled.
We measure your fence on site, identify the series and profile, and source the OEM part or a quality matched equivalent to the spec. We don’t carry parts on a truck and we’re not affiliated with CGI – we’re an independent contractor, so we’ll show you exactly what we’re installing and what it costs before you commit.
If your CGI fence line in Vallejo has started to lean, rust, or pull loose, the fix is a written price and a crew that shows up when it says it will. Bradford Remodeling Co Vallejo installs CGI-compatible fence systems and premium brands including KraftMaid, Cambria, and Silestone – every job backed by The Garrison Standard and the 365-Day Done Right Promise. Call (844) 560-4789 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Vallejo, serving Vallejo and nearby areas.












