







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Vallejo Homeowners Choose CGI Construction
We provide independent CGI construction service in Vallejo – cabinet installation and refacing, quartz and granite countertops, and small or partial kitchen remodels – with a written price before any work starts. What makes our CGI work different is that we’re not tied to the manufacturer, so our recommendation follows what your cabinets and counters actually need, not what sells. One point up front: we are an independent CGI service provider and are not affiliated with or authorized by CGI. We work on CGI products because we know them, not because the brand sent us. Call (844) 560-4789.

Why Trust Bradford Remodeling Co Vallejo for Your CGI Construction?

Our technicians have up to 22 years of experience, and a good share of that has been spent inside CGI kitchens – cabinets, countertops, and the repairs in between. They know how a Prelude framed door behaves after ten years of steam, where a Sierra frameless box flexes, and which QuartzStone and Granite Impressions installations fail at the cutout rather than the surface. That familiarity matters most at the parts level. We source OEM-compatible CGI replacement doors, drawers, and hardware where it protects your warranty and your finish match, and we’re candid when an aftermarket component does the job better.
Service is warranty-safe: we don’t drill, cut, or refit in ways that give a manufacturer grounds to void coverage, and we tell you plainly which repairs are cosmetic and which touch structure. Every job carries a written price before work begins and the 365-Day Done Right Promise – a full-year written guarantee that if the work fails inside that window, we come back and correct it at no charge. In Vallejo, that written scope ends with a clean site and a signed guarantee in your hand.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Fix in Vallejo
CGI products hold up well when installed and vented correctly. The failures we see in Vallejo tend to trace back to moisture, support, or hardware wear rather than the material itself. Here are the five that come up most.
- Cabinet door sagging and hinge pull-out. The particleboard core around the hinge screws swells when kitchen steam and under-sink moisture get into it. Once the board swells, screws won’t hold torque and the door drops out of alignment – a Prelude door near a dishwasher is the classic case.
- Quartz countertop chipping at sink and cooktop cutouts. QuartzStone is strong across the field but thin at the cutout edge. Improper support under the span or thermal shock from a hot pan set beside a cold sink edge can chip the arris, and a chip at a cutout is where moisture and stress concentrate.
- Drawer glide failure and track misalignment. CGI’s side-mount economy glides take a beating in a heavy-use drawer and eventually lose their track. The drawer then rubs the face frame, and the misalignment spreads to neighboring drawers.
- Finish peeling and delamination on MDF doors. Doors beside the dishwasher and under the sink sit in the dampest, hottest spot in the kitchen. The MDF face swells and the finish lifts, usually starting at an edge.
- Raised-foundation movement showing up in cabinetry. Vallejo’s older wood-frame homes on pier-and-post foundations shift seasonally, and that movement telegraphs into cabinet boxes and countertop seams. It reads as a cabinet problem but starts at the floor.
CGI Parts & Our Repair-vs-Replace Approach

Parts come down to two questions: does it match, and does it hold. We source OEM CGI replacement doors, drawers, and hardware when they’re available, because they preserve your warranty and your finish match – a replacement door in the same series and color reads as original. Where OEM isn’t the better answer, we fit high-quality aftermarket soft-close hinges and glides that often outperform the original components at a lower cost. We don’t keep local stock of CGI parts; each job is sourced to the model and finish, which is also why we ask for photos or a model tag before quoting.
Repair versus replace is an honest call, not a sales one. If your cabinet boxes are solid, refacing or partial replacement is usually smarter and cheaper than a full tear-out. If the boxes have swelled through, new doors only buy time. We’ll show you which is which. Call (844) 560-4789 for a free estimate and a written price.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We identify the CGI series – Prelude, Sierra, QuartzStone, Granite Impressions – and trace the failure to its source: moisture, support, hardware, or foundation movement.
- 2
Written scope and price. You get the fix, the parts, and the dollar range in writing before any tool comes out. No numbers that move at the door.
- 3
Repair or install. Hinge holes are drilled out and doweled, countertops are re-supported at cutouts, glides are replaced, or new doors and counters go in to spec.
- 4
Test and close. Doors close flush, drawers run smooth, seams are sealed, and the site is left clean. You leave with a documented scope and a signed written guarantee.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Vallejo
We service and install the CGI cabinetry lines Vallejo kitchens actually have: the Prelude series, a framed full-overlay door, and the Sierra series, a frameless slab door. On the countertop side, we install and repair the QuartzStone engineered quartz collection and Granite Impressions natural stone slabs, including cutout edges, sink and cooktop surrounds, and seam work. That covers the refacing, partial replacement, and small kitchen remodel work most CGI owners are calling about.
We Also Service These Brands
CGI isn’t the only line we know. Bradford Remodeling Co Vallejo works across KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone surfaces, and Kohler and Moen fixtures on the same documented-brands basis – manufacturer specs and warranties that back our own guarantee. If your project mixes CGI cabinets with a Cambria counter, we handle both under one written scope.
FAQs – CGI Construction Service in Vallejo

No. We are an independent CGI service provider and are not affiliated with or authorized by CGI. We service and install CGI products because our technicians have up to 22 years of hands-on experience with them, not because we carry brand authorization. That independence is the point: our recommendation follows your repair, not the manufacturer’s interests. Call (844) 560-4789 for a free estimate.
We use genuine OEM CGI replacement doors, drawers, and hardware when they’re available, since they protect your warranty and finish match. When an aftermarket soft-close hinge or glide is the better fit, we say so and explain why. Each job is sourced to your model and finish rather than pulled from local stock.
Most repairs – hinge and glide replacement, door refit, countertop chip repair – are a single visit once parts arrive. Refacing or a partial kitchen remodel runs longer depending on door lead times. You get the timeline in writing with the price before work starts.
We cover the CGI cabinetry Prelude series (framed, full-overlay) and Sierra series (frameless, slab door), plus the QuartzStone engineered quartz collection and Granite Impressions natural stone slabs. If your model isn’t on that list, send a photo or model tag and we’ll confirm.
Not when it’s done correctly. We avoid cuts, refits, and fastener changes that give a manufacturer grounds to void coverage, and we document what we did. Where an OEM part is needed to keep coverage intact, we source it. Call (844) 560-4789 to talk through your specific warranty question.
Typical Vallejo ranges run from a few hundred dollars for a single hardware repair up to a full small kitchen remodel. The line items below are the ranges we work from, and every job gets a written price before work starts.
| Service | Typical Range (Vallejo) |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Small Kitchen Remodel | $9,000 – $20,000 |
Call (844) 560-4789 for an exact quote on your CGI project – estimates are free.
You can usually repair them if the swelling is localized around the screw holes. This is the most common CGI cabinet failure we see: doors stop closing flush and the hinges feel loose because steam near the dishwasher swelled the particleboard core. A qualified installer typically removes the door, drills out the damaged holes, inserts hardwood dowels or repair plates, re-drills, and reinstalls with new soft-close hinges – often upgrading to heavier-duty glides at the same time to prevent repeat failure. If the swelling runs the full door edge, new doors are the honest answer. Call (844) 560-4789 for a free estimate.
Most chips at a sink or cooktop cutout are repairable if the stone around them is sound. QuartzStone chips usually happen at cutout edges from improper support or thermal shock, and the fix is a color-matched epoxy fill blended to the surface, followed by re-supporting the span so it doesn’t recur. A chip that has spread into a crack through the slab means replacement of that piece. We’ll tell you which you’re looking at before any work starts.
Yes, in most cases. CGI’s stock side-mount glides and standard hinges can be swapped for quality aftermarket soft-close hardware, and the upgrade often outlasts the original components at lower cost. Frameless Sierra boxes and framed Prelude doors each take a different hinge, so we match the hardware to the series. Call (844) 560-4789 and we’ll confirm the fit for your model.
A well-vented CGI particleboard cabinet can run 15 to 20 years before hardware and finish issues pile up; in a humid, poorly vented kitchen, moisture damage around the dishwasher and sink can shorten that noticeably. The failure driver is steam and under-sink damp, not the box itself. Proper venting, prompt hinge repair, and sealed cutouts are what extend the life.
Yes, and it’s often the smarter move. If the boxes are solid and square, refacing or replacing only the doors and drawer fronts is cheaper than a full tear-out and keeps your layout. We check the boxes for swelling and the floor for foundation movement first, because new doors on a shifting box won’t stay aligned.
Book Your CGI Service in Vallejo, CA
If your CGI cabinets, doors, or countertops need a look, call (844) 560-4789 for a free estimate. You’ll get a written price before any work starts, background-checked technicians on the job, and the 365-Day Done Right Promise on every completed project. A live person answers the phone, day or night. Call Bradford Remodeling Co Vallejo and get your CGI work squared away.
Written by the team at Bradford Remodeling Co Vallejo.












