







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Fairfield, CA
We provide independent Dvele service across Fairfield, from modular and panelized shells to the kitchens, baths, and additions built around them. What sets our Dvele work in Fairfield apart is the ground itself: much of the older 94533 flatlands sits on expansive Solano clay that has to be corrected before any factory module can be set level and tied in. Bradford Remodeling Co Vallejo is an independent contractor familiar with Dvele’s building systems, not a manufacturer-affiliated or authorized Dvele dealer. Call (844) 560-4789 for a free estimate.

Why Fairfield Residents Choose Us for Dvele Service
Fairfield is a split market, and we work both halves of it. In the older flatlands around 94533, we’re typically correcting foundations and drainage under 1950s-70s ranch tract homes before a Dvele modular or panelized addition can go on. Up in Rancho Solano, Paradise Valley, and Cordelia, it’s HOA-governed work on newer two-story stucco homes, where the Dvele shell has to meet existing framing cleanly. Our technicians have up to 22 years of experience, and they know how Dvele assemblies are meant to fit together. We specify OEM-compatible connector hardware, sealants, and flashing at module joints, so the assembly’s rated performance stays intact. Every price is in writing before work starts, and all completed work carries the 365-Day Done Right Promise. Through our Dvele service line, we handle both the shell and the finish work around it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Solve in Fairfield
These are the Dvele issues we run into most on Fairfield projects, and why they show up here specifically.
- Moisture trapped at module joints. Dvele’s factory-sealed wall and roof modules can hold moisture at shipment seams when site-set joints aren’t flashed and taped before cladding goes on. Fairfield’s wind-driven rain events push water straight at those seams, so we open and re-flash them properly.
- Field modifications that void the rating. Because Dvele assemblies are engineered as complete systems, cutting a module wall for a field-framed addition or moving a vent creates thermal bridging and air leaks. We work around the assembly instead of through it.
- Fastener back-out after crane set. Dvele modules crane-set in Fairfield’s hot, windy summers can develop panel-joint movement at module-to-module connections. We re-check hold-downs and shear connections after setting.
- Roof-to-wall junction leaks. Where Dvele’s factory membrane ends and field roofing takes over is a common leak path, and expansive clay sites make it worse: minor foundation movement stresses those seams over time.
- Unlevel tie-ins on settled slabs. Older 94533 homes often show foundation settling and slab cracks, so a new module can sit out of level at the existing wall. We resolve the foundation and drainage first.
Dvele Service in Fairfield: What Local Conditions Mean for Your Equipment
Fairfield straddles I-80 between the Bay Area and Sacramento, and the city runs as a logistics hub. That matters for Dvele work in a way it doesn’t in neighboring Vacaville or Vallejo. Dvele’s modules ship by truck and get set by crane, and crane and delivery scheduling here has to work around the same I-80 and Highway 12 corridor congestion that feeds the warehouse buildout. On top of that, the older 94533 tract homes on expansive clay often need foundation and drainage work resolved before a modular addition can be set level. A typical job goes like this: a homeowner in Fairfield’s older flatlands decides to add on with a Dvele panelized or modular system, but the existing slab and footing has settled unevenly on Solano clay, so the new module sits out of level at the tie-in. A qualified local pro corrects the foundation and drainage first, then re-checks module-to-existing-wall connections and flashing after the crane set, because that’s where leaks and air infiltration show up first.
Dvele Models & Products We Service in Fairfield
We work with Dvele modular single-family home packages, including the factory-built wall, floor, and roof modules shipped to site. We also handle Dvele panelized wall and roof systems for custom and infill builds, and the high-performance envelope assemblies with integrated WRB and exterior insulation. On parts, we use Dvele’s specified connector hardware, sealants, and flashing at module joints wherever they’re available, since the assembly’s performance rating depends on them. We substitute only with equivalent-rated products the manufacturer’s engineering allows. We don’t claim to stock parts locally; each job’s components are sourced per the assembly’s specification.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Fairfield

Dvele work in Fairfield is priced by scope, and every number is in writing before any tool comes out. What drives the cost is whether foundation and drainage correction is needed first, how much finish work surrounds the shell, and the material roster you choose (KraftMaid or Wellborn cabinetry, Cambria or Caesarstone surfaces, Kohler or Moen fixtures). Here’s what the core services typically run:
| Service | Price Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Repair | $400 – $1,800 |
A free estimate includes a walk of the site, a check on the existing foundation and drainage, and a written line-item quote. Call (844) 560-4789 to schedule yours.
Serving Fairfield, CA – Our Local Coverage Area
We serve Fairfield and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Fairfield
No. We are an independent Dvele service provider, not manufacturer-affiliated or authorized, and we never claim to be endorsed by Dvele. Our credibility comes from working with Dvele’s assemblies on real Fairfield-area projects. Call (844) 560-4789 to talk through your build.
Often, yes. The expansive Solano clay under much of Fairfield’s older 94533 flatlands moves with moisture, so a Dvele module has to be set on a corrected, level foundation with proper drainage. We evaluate the foundation before quoting any modular addition. Call (844) 560-4789 for a free site assessment.
A home addition in Fairfield typically runs $45,000 – $130,000, and a standalone ADU runs $90,000 – $220,000. Foundation correction and finish scope move the number most. Call (844) 560-4789 for an exact quote, and estimates are free.
Yes. We handle full kitchen remodels ($14,000 – $45,000) and bathroom remodels ($9,000 – $28,000) inside Dvele-built homes, working around the shell so we don’t compromise the module’s rated envelope. Call (844) 560-4789 to price yours.
Most often it’s two things together: module joints that weren’t flashed and taped properly before cladding, and foundation movement on Fairfield’s clay stressing the roof-to-wall seams. Both are repairable. Call (844) 560-4789 and we’ll take a look.
Service Areas Near Fairfield
Along with Fairfield, we serve homeowners in Vallejo, Benicia, Martinez, and Suisun City. Our Fairfield service area covers both ZIP codes, 94533 and 94534. We also work in American Canyon and the surrounding Solano County corridor.
Book Your Dvele Service in Fairfield Today
If you’re planning a Dvele build, addition, or remodel in Fairfield, call (844) 560-4789 for a free estimate. A live person answers the phone around the clock, so you’ll reach someone today. You’ll get a written price and a clear scope before any work starts.
Written by the team at Bradford Remodeling Co Vallejo.












