







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Bathroom Remodeling: The Vallejo Owner’s Guide
Bathroom remodeling in Vallejo typically runs $9,000 to $28,000 installed, and that price is set in writing before any work begins. If you landed here because an IKO product in your bathroom is failing – a shower base that flexes, a membrane that’s letting water past, a tile assembly that’s scored and lifting – you’re in the right place. We install IKO-compatible bathroom assemblies and we’ll tell you plainly what’s failing, why, and what a correct install costs. Bradford Remodeling Co Vallejo is an independent service provider and is not affiliated with IKO.

Most Vallejo owners discover the problem the same way. A soft spot underfoot in the shower. A hairline crack at the base perimeter. Grout that keeps coming out no matter how many times it gets patched. Or a stain blooming on the ceiling of the room below. By the time you’re reading a parts page, the assembly has usually been leaking behind the finish for a while – Vallejo’s wet winters and older housing stock push water into places you can’t see until it’s already done damage.
Which IKO Models This Applies To

IKO is best known for roofing and waterproofing systems, so the IKO product in a bathroom is almost always a waterproofing membrane, underlayment, or moisture barrier – not a fixture. That matters for sourcing. The label on the original material is your starting point. Check the roll end, the packaging if you kept it, or the printed markings on any exposed membrane edge for the product name and series. If you can’t find a label, the measurable facts are what we work from: membrane thickness (often given in mils), sheet width, and whether it’s a bonded or loose-laid system.
This is where the compatibility gotcha bites. Two IKO membranes with the same appearance can carry different thickness specs and different bonding requirements, and a substitute that’s “close enough” on paper can fail at the seams – which is exactly where water gets in. For IKO specifically, we confirm the series and the intended substrate (cement board, plywood, or existing tile) before we quote. OEM material carries the manufacturer’s own written warranty; a quality aftermarket equivalent can work and often costs less, but you should know which one you’re getting and why. We don’t guess, and we don’t carry stock – every part is sourced to your assembly.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Bathroom Remodeling Is Failing
- Flexing or spongy floor in the shower or tub surround. The substrate underneath has taken on water and lost its stiffness. Once it’s soft, patching the surface hides the problem rather than fixing it.
- Recurring cracks or crumbling grout at seams and corners. Movement plus moisture is escaping past the waterproofing layer. Regrouting buys weeks, not years.
- Water staining on the ceiling or wall below. The membrane or a seam has failed and water is traveling. This is the clearest signal to stop using the shower and get it opened up.
- Musty smell that won’t clear with cleaning. Moisture is trapped behind the finish where no cleaner reaches. Ventilation helps but won’t dry out a failed assembly.
- Lifting, hollow-sounding, or discolored tile. The bond has broken down from underneath. Hollow tile near a wet wall is a failing substrate, not a cosmetic issue.
Replacement Cost & What’s Included

For Vallejo homes, a full bathroom remodel lands in the $9,000 to $28,000 range. A small bathroom remodel runs $5,000 to $12,000. If the failure is isolated to a shower, a shower replacement is $3,000 to $8,500, a walk-in shower installation is $4,500 to $12,000, and a tub-to-shower conversion is $3,500 to $10,000. A vanity swap alone is $800 to $3,000.
What drives the range: how much of the failed assembly has to come out, whether the substrate is sound or needs replacing, membrane and tile selection, and the condition of the rough-in plumbing once it’s exposed. Every Bradford price is written and line-itemed before work starts – no numbers that move at the door. The Garrison Standard means the scope is signed and the price is fixed. All completed work carries the 365-Day Done Right Promise: if it fails inside a full year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
An owner can safely do a few things: find the product label, measure the visible membrane thickness and sheet width, check for soft spots by hand, and shut off water to the bathroom if a ceiling stain appears. That’s diagnostic, and it helps.
What goes wrong with this part is the waterproofing itself. A membrane that isn’t lapped correctly, bonded to the right substrate, or sealed at the seams will pass a visual check and still leak – and you won’t know for six to twelve months, when the substrate is gone. Setting tile over a compromised layer traps the water. This is the point where DIY costs more than a proper install. Our technicians have up to 22 years of experience, and they’re background-checked and uniformed, so you know who’s coming through the door. Call (844) 560-4789 and a live person picks up, day or night. We’ll give you a written price before anything starts.
FAQs

A correctly installed waterproofing assembly typically lasts 15 to 25 years. Vallejo’s wet winters and older housing stock shorten that when ventilation is poor or a seam was never quite right. The failure usually starts at a seam or the base perimeter, not in the middle of an intact sheet. Call (844) 560-4789 for an exact quote – estimates are free.
Sometimes, but only if the failed area is genuinely isolated and the substrate underneath is dry and sound. In most Vallejo cases we open, the substrate has been wet long enough that a patch won’t hold. We’ll tell you honestly which side of that line you’re on before you commit. Call (844) 560-4789 to schedule a free estimate.
A shower assembly replacement usually takes three to six working days; a full bathroom remodel takes two to four weeks, depending on scope and tile. We give you the timeline in writing with the price, so there are no surprises mid-job. Call (844) 560-4789 to get your written scope and schedule.
We identify your product by label and by measured specs (thickness, sheet width, bonding type), then source the correct OEM material or a documented quality equivalent and tell you which one you’re getting. We don’t carry parts and we don’t stock them – each part is matched to your assembly. Bradford works from a documented brand roster, including KraftMaid, Cambria, and Silestone alongside IKO materials. Call (844) 560-4789 for a free estimate.
Get Your Written Price
If an IKO product in your Vallejo bathroom is failing, don’t wait for the ceiling stain. Call (844) 560-4789 for a free estimate – a live person answers 24/7. You’ll get a written, line-itemed price before any work starts, a fixed scope under The Garrison Standard, and the 365-Day Done Right Promise on the finished job. Clean site, signed guarantee in your hand, squared away.
Written by the team at Bradford Remodeling Co Vallejo, serving Vallejo and nearby areas.












