







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Home Additions & ADU: The Vallejo Owner’s Guide
We build and finish home additions and ADUs in Vallejo with Kohler fixtures specified into the plan, and a full addition typically runs $45,000 – $130,000 installed, while a detached or attached ADU runs $90,000 – $220,000. Those are real written-price ranges, not a “call for a quote” teaser. Kohler shows up in these builds at the fixtures and hardware: the shower trim, the bath faucets, the toilet, the kitchen sink and pull-down sprayer, sometimes the tile-in shower base and drain.

Owners usually discover a Kohler failure the same way. The cartridge in a single-handle faucet starts weeping at the base. The shower trim plate sits a quarter-inch off the wall after the valve behind it shifted. The toilet fill valve runs for a full minute after every flush. Or the sink strainer on a Kohler apron-front sink starts leaking under the cabinet and the cabinet floor swells. None of these arrive suddenly. They come on slow, and you notice when a Vallejo water bill ticks up or a cabinet bottom feels soft underfoot.
Which Kohler Models This Applies To

Kohler sells a lot of trim, and the good news for Vallejo homeowners is that most replacement parts are matched by model number, not by guesswork. Faucets carry a model number on the tag under the escutcheon or on the handle body. Toilets carry a model number on the inside of the tank lid or the tank wall. Shower valves usually have a rough-in valve behind the wall and a trim kit in front, and those two are matched as a pair; a trim kit from one Kohler series generally does not fit a rough-in valve from another without an adapter or a valve change.
This is the first compatibility gotcha: matching the trim kit to the rough-in valve matters more than matching the finish. We see homeowners order a Kohler shower trim by finish and style, then discover the rough-in behind the wall is a different series and the trim won’t seat. The second gotcha is cartridge family. Kohler’s single-handle cartridge designs are not interchangeable across product lines, and a cartridge sold as “Kohler compatible” often fits one series and not the one in your house.
On the OEM question, we spec Kohler OEM parts whenever they’re available and the model is still supported. The finish match, the internal geometry, and the pressure-balancing behavior come from the factory spec. Aftermarket equivalents make sense when the OEM is discontinued for an older fixture in an original Vallejo bathroom and a name-brand rebuild kit will bring the valve back to service.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Home Additions & ADU Is Failing
Here’s what to look for, with the cause behind each:
- The faucet weeps at the base or the handle drips when closed. The cartridge is worn, or mineral scale has built up on the ceramic disc inside it. Vallejo’s water runs moderately hard and carries elevated mineral content, and that shortens cartridge life compared to softer-water markets.
- Water pressure at the shower is fine, but the trim plate won’t sit flat. The valve body has shifted in the rough-in, or the mounting screws have stripped the tile and backer behind them after a few seasons of thermal cycling.
- The toilet runs for a minute after every flush, or the tank refills on its own overnight. The fill valve or flapper has failed. Kohler fill valves use a specific seat height and a specific cap assembly; the wrong cartridge is a common cause of the repeat failure.
- The sink or tub drain basket leaks under the cabinet. The gasket at the drain body has hardened, or an apron-front sink’s strainer collar has worked loose against the cabinet floor.
- The shower valve squeaks or the temperature swings when a neighbor draws water. The pressure-balancing spool inside the valve has stiffened or scaled. A rebuild cartridge handles most of these without replacing the valve.
Replacement Cost & What’s Included

Here’s what installed Kohler fixture work runs in Vallejo, straightforwardly:
| Scope | Typical Installed Range |
|---|---|
| Home addition (shell, finishes, Kohler fixtures specified) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
| Shower valve and trim replacement | $450 – $1,200 |
| Toilet fill valve and flapper rebuild | $120 – $280 |
| Bath or kitchen faucet cartridge rebuild | $95 – $220 |
| Sink drain or strainer replacement | $110 – $260 |
The range on a larger build moves with square footage, framing and foundation scope, whether a permit triggers a full plan review, and the fixture tier you choose inside Kohler. Every Bradford price is written before work starts, with the fixture model numbers on the sheet, and every completed project carries the 365-Day Done Right Promise: if the work fails inside that window, we return and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There’s an honest split here. You can safely check the model number on the tank lid or faucet body, wipe the cartridge area with a soft cloth to look for scale, and shut off the supply valve to confirm whether a drip stops. That much is useful information for us.
What we don’t recommend you take on yourself is anything behind the wall or tied to the water distribution. A shower valve rough-in sits behind tile and backer; opening that wall, desoldering or unclipping the valve, and re-seating the new rough-in without a leak takes more than a weekend. Removing a toilet to reset a wax ring on a tiled floor risks cracking the bowl and, more importantly, a slow leak under the floor that shows up weeks later. Same with a cartridge seated in a valve body that’s been sealed in place for a decade; forcing it out can crack the valve and turn a $200 repair into a $1,200 wall-open valve replacement. Call us at (844) 560-4789 and we’ll get you a written price before any work starts.
FAQs

Expect 8 – 12 years from a Kohler ceramic-disc cartridge in Vallejo’s water, and 10 – 15 years from a pressure-balancing shower valve. Vallejo’s water carries enough mineral content that cartridges tend to fail sooner here than in softer-water parts of the Bay Area, so we factor that into what we spec on new builds and remodels.
Often, yes. A single-handle Kohler faucet can usually be rebuilt with a factory cartridge, and a shower valve can usually be rebuilt with a pressure-balancing spool kit rather than replaced. If the valve body itself has cracked or the rough-in is out of square, replacement is the better money. Call (844) 560-4789 for a free estimate and we’ll tell you which one your fixture needs.
A faucet cartridge rebuild takes one visit, usually under two hours. A toilet fill valve and flapper takes under an hour. A shower valve and trim replacement takes one day because the wall has to be opened, the rough-in reset, and the tile patched before the trim goes back on. Full additions run weeks to months depending on scope, and we give you the schedule in writing before we start.
We source by model number from the fixture label, then verify the trim matches the rough-in valve behind the wall before we order. We don’t stock parts and we don’t carry a truck full of Kohler inventory. We confirm the model, order the right part, and the written price on the estimate reflects that. Call (844) 560-4789 with your model number and we’ll get the right part moving.
Kohler Fixtures Beyond the Fixture
The same Kohler spec works into the surrounding rooms. When a homeowner is re-doing the bath around a failed Kohler fixture, the cabinet, countertop, and tile usually come up together, and we spec KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces alongside the Kohler trim so the whole bathroom matches in one written scope. We’re an independent provider and not affiliated with Kohler, but we know their product line well enough to match OEM parts, spec the right trim, and get the install right the first time. That’s the Garrison Standard in practice: written price, background-checked uniformed technicians on every job, live person answering the phone 24/7, and a signed 365-Day Done Right Promise in your hand at close.
If you’re in Vallejo and a Kohler fixture is failing or an addition or ADU is on the table, call (844) 560-4789 for a free estimate. We’ll give you a real written price before any work starts.
Written by the team at Bradford Remodeling Co Vallejo, serving Vallejo and nearby areas.












