







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Plant Prefab Driveway & Pavers: The Vallejo Owner’s Guide
We install driveway surfaces and paver systems that work with Plant Prefab homes in Vallejo, and a full paver driveway runs $7,000-$18,000 installed while concrete lands at $4,500-$12,000 and asphalt at $3,500-$9,000. Replacement of an existing drive typically falls in the $5,000-$14,000 band depending on square footage and base condition. Most Vallejo owners find out something is wrong when they notice the same thing we do on the first walk-through: a low spot near the garage apron that holds water after every rain, pavers that rock underfoot, or a hairline crack that widens over one wet season.

Key Takeaways
- Paver driveway installation in Vallejo: $7,000-$18,000 installed.
- Concrete driveway: $4,500-$12,000. Asphalt: $3,500-$9,000.
- Driveway replacement: $5,000-$14,000. Sealing runs $250-$700.
- We’re an independent service provider. We’re not affiliated with Plant Prefab.
- Every job carries a written price before work starts and the 365-Day Done Right Promise.
Which Plant Prefab Models This Applies To

Plant Prefab builds modular and panelized homes across several product lines, and the driveway and paver package doesn’t change much line to line. What changes is the site work around the unit. A panelized build set on a slab in the Vallejo hills sits differently than a modular unit dropped onto a prepared foundation in a flat subdivision lot, and the apron transition at the garage or carport is where those differences show up.
To identify what you’re working with, look at three things before you call anyone:
- The set drawings that came with your Plant Prefab home. They show the intended hardscape footprint, slope, and any drainage swales.
- The apron and threshold details. Measure the width of the existing drive at the garage opening. Most Plant Prefab units spec a standard single-car apron, but additions and shop builds vary.
- The base layer. Pull a small test area (a foot square is enough) and check aggregate depth. If you see less than 4 inches of compacted base under pavers, that’s the conversation that matters, not the paver brand.
On the OEM-vs-aftermarket question: there is no proprietary “Plant Prefab paver.” The hardscape is a site-built assembly using standard paver units. That means you’re free to use quality aftermarket product from Belgard or Unilock, or match what’s already installed. We don’t carry parts and we don’t stock pavers on a truck. What we do is source from documented manufacturer lines so the spec sheet and the warranty are traceable.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Plant Prefab Driveway & Pavers Is Failing
Vallejo sits on clay-heavy soil in many neighborhoods, and that clay moves with the wet-dry cycle. Here’s what that looks like when the drive starts to go:
- Pavers rocking underfoot or showing joint sand washout. The bedding layer has lost compaction or the base wasn’t deep enough to begin with. Water gets in, the sand washes out, and the units start to shift.
- Ponding near the garage apron or along the low edge. Slope has flattened out or a drainage path has clogged. Standing water in Vallejo’s rainy months finds every weak point in the base and makes it worse fast.
- Hairline cracks that widen over one season. On concrete, that’s usually a control joint issue or a slab that’s settling unevenly. On pavers, a widening gap means the base beneath that section has moved.
- Efflorescence (white chalky deposits) that keeps coming back after cleaning. Moisture is migrating through the slab or pavers from below. It’s a drainage and base problem, not a surface cleaning problem.
- Heaving or a trip edge where one paver sits noticeably higher than its neighbor. Root intrusion or frost lift in the base. It’s a trip hazard and it will get worse with each wet season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

What the numbers above include: demo and haul-off of the old surface, base prep and compaction, drainage correction where needed, new paver, concrete, or asphalt surface, and cleanup. What drives the range is square footage first, then base condition, then access. A tight side-yard drive with no equipment access costs more in labor than an open front lot.
Part of the Garrison Standard is that every price is written before a tool comes out. You’ll see line items, not a lump sum. If the base turns out worse than the test area showed, we stop and requote in writing before we continue. No numbers that move at the door. Every install carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.
Sealing, if you want it, runs $250-$700 and we schedule it after the new surface has cured, not before.
DIY or Call Us?
What you can safely do yourself: check for ponding after a rain and note where it sits, measure the drive at the apron, test the base depth with a small probe, and take photos. All of that helps us quote accurately and saves you money on the visit.
What we’d stop you from doing: tearing up pavers and re-laying them on the existing base. The failure almost always lives in the base, not the pavers. If you reset units without fixing compaction and drainage, you’ll be back to a rocking drive after one wet season in Vallejo, and you’ll have spent the weekend twice. Same goes for pouring concrete over a settled slab without addressing what moved.
If you’re not sure whether it’s a surface problem or a base problem, the estimate is free. Call (844) 560-4789 and we’ll give you a straight answer on whether you’re looking at $250 sealing or a $9,000 replacement.
FAQs

A properly installed paver driveway on a well-compacted base should hold 25-30 years; the pavers themselves often outlast the base. Vallejo’s clay soil and wet winters are the real test, so base depth and drainage matter more than the paver brand you pick.
Sometimes yes. Localized settling or a single failed section can often be lifted and re-set with new base. Widespread rocking or repeated efflorescence across the whole drive usually means a full replacement is the honest answer. We’ll tell you which one you’re looking at during the estimate, no pressure either way. Call (844) 560-4789 for a written quote.
Most single-drive paver installs in Vallejo run 3-5 working days from demo to final compaction, weather allowing. Concrete takes longer because of cure time; plan 5-7 days before you drive on it. Asphalt is similar. We’ll give you the exact schedule in writing before we start.
We source from documented manufacturer lines like Belgard and Unilock, and we’ll match existing product or recommend a compatible unit if yours is discontinued. Since the hardscape is site-built, you’re not locked into a proprietary part. We also work with KraftMaid, Cambria, and Silestone on interior projects, but for the drive it’s the paver line and the base spec that matter. Call (844) 560-4789 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Vallejo, serving Vallejo and nearby areas.












