







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Kitchen Remodeling: The Vallejo Owner’s Guide
Schluter-compatible kitchen remodeling in Vallejo runs $14,000 – $45,000 installed for a full kitchen, with the waterproofing and tile-interface work priced inside that range, not bolted on after. If you’re replacing failed Schluter membrane, uncoupling mat, or a shower-to-counter transition that has already let go, a targeted repair of the affected area commonly lands at the lower end of that range, and we give you the number in writing before the first tool comes out. We schedule by appointment, not same-day, because jobs done right get planned right.

Vallejo owners usually find out the hard way. A grout line behind the sink keeps darkening no matter how often it’s scrubbed. A tile sounds hollow underfoot near the dishwasher. Or the laminate on the counter’s edge lifts a quarter inch after a hot summer, and when you peel it back there’s a soft, chalky layer underneath – that’s what a failed decoupling or waterproofing layer looks like from the homeowner’s side of the wall.
Key Takeaways
- Schluter systems are a family of waterproofing and tile-interface products (KERDI, DITRA, KERDI-BOARD, DITRA-HEAT, SCHIENE, and others), not a single part – matching the right one to your kitchen matters more than the brand name.
- Full Vallejo kitchen remodels with correct Schluter substrate and waterproofing: $14,000 – $45,000.
- Every Bradford project carries a written price up front and the 365-Day Done Right Promise: if the work fails inside a year, we return and correct it at no charge.
- We are an independent remodeling contractor. Bradford Remodeling Co Vallejo is not affiliated with Schluter Systems.
Which Schluter Models This Applies To

Schluter isn’t a kitchen appliance, so there’s no serial plate on the side to read. What you have is a system, and the “model” question really means: which product is in your kitchen, and is it the correct one for that assembly? The main ones Vallejo homeowners run into:
- KERDI – the bonded waterproofing membrane. Used behind kitchen backsplashes over moisture-prone walls, and in any wet area. Sold in rolls (commonly 3’3″ and 4’11” widths) and as KERDI-BAND for seams and corners.
- DITRA – the uncoupling membrane under tile floors. It isolates the tile from movement in the wood or concrete subfloor. DITRA-XL is the thicker version used where height matters less.
- KERDI-BOARD – the foam building panel that replaces drywall or cement board in wet zones. Thicknesses run roughly 1/8″ up to 2″, and the number is printed on the panel edge.
- DITRA-HEAT – the electric floor-warming variant with clips for the heating cable.
- SCHIENE, JOLLY, RONDEC – the edge and transition profiles, usually aluminum or PVC, in 3/8″, 1/2″, and other leg heights sized to your tile thickness.
Identifying what you have: look at any exposed membrane edge under a cabinet toe-kick or behind a baseboard – the product name is printed continuously along the fleece. Check leftover rolls in the garage, or the contractor’s material list if you kept it. Profiles are easier: measure the tile thickness and match the leg height, because a 3/8″ profile on 1/2″ tile leaves a lip you’ll feel every time you wipe the counter.
OEM versus aftermarket for Schluter specifically
Here’s the compatibility gotcha that trips people up: Schluter’s system relies on its own thin-set chemistry and its own proprietary fleece, which is why the company specifies unmodified thin-set over KERDI (the membrane’s fleece grabs it mechanically). Substituting a generic uncoupling mat and a modified thin-set from the box store is not an equal swap – the assemblies are tested as a system, and mixing brands voids the manufacturer’s warranty even when each piece is fine on its own. For Schluter, match the system as a whole. Use the genuine membrane, band, and profiles with the specified thin-set, and keep the paperwork. Aftermarket equivalents exist and some perform well, but they don’t carry Schluter’s tested-assembly warranty, and that matters when the point of the product is to keep water out of a wall you can’t see into.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Kitchen Remodeling Is Failing
In Vallejo, the failures we’re called to aren’t random. Winters push moisture against exterior kitchen walls, and summer heat cycles the tile and counter joints. Add a house built on expansive bay-area clay and you get movement the membrane was supposed to absorb. What to watch for:
- Grout cracking in a straight line or a grid pattern. The tile is moving and the uncoupling layer either wasn’t installed, was installed with the wrong thin-set, or the seams weren’t banded. Cracks that reappear after regrouting point to the substrate, not the grout.
- Hollow-sounding tile underfoot. Tap with a plastic screwdriver handle. A dull thud rather than a sharp click means the thin-set didn’t bond – usually dust or the wrong trowel notch over the membrane. Loose tile can’t be saved by regrouting.
- Dark or damp grout at the base of the backsplash or behind the sink. Water is getting behind the tile because the KERDI layer was skipped or the KERDI-BAND wasn’t run at the counter-to-wall joint. Wet drywall behind it will eventually crumble.
- Lifting or curling edge profile. A SCHIENE or JOLLY leg sized wrong for the tile, or one that was never fully bedded in thin-set, catches on towels and eventually pulls free, leaving a sharp aluminum edge.
- Counter seam opening or a soft spot near the dishwasher. The substrate under the counter or the floor has taken on water. By the time you feel softness, the layer below has usually been wet for a season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Vallejo, here’s where the numbers land. These are installed ranges – parts and labor together, priced in writing before any work begins.
| Job | Installed range |
|---|---|
| Full kitchen remodel (Schluter substrate and waterproofing included) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation (KERDI behind, profiles at edges) | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: the square footage of tile and membrane, whether the subfloor needs repair before DITRA goes down, cabinet line (we install KraftMaid and Wellborn, with Cambria and Caesarstone surfaces – KraftMaid, Cambria and Silestone are among the documented brands we work with), and how much of the old assembly has to come out to get to sound substrate. The worst surprise on a membrane failure is discovering wet wall cavity behind it – that’s a demolition line, and you’ll see it quoted before we touch anything. No part of our pricing moves at the door. Every completed job is covered by the 365-Day Done Right Promise: if the membrane, tile, or profile work fails within a year, we come back and fix it at no charge.
DIY or Call Us?
Some of this you can check yourself. Matching a profile height to your tile thickness, reading the product name off an exposed membrane edge, tapping for hollow tile, and photographing everything before you call – all safe and useful. Regrouting a hairline crack is fair game too.
Where DIY goes wrong is the part you can’t see. Slapping new grout over moving tile hides a problem that keeps spreading. Re-tiling a backsplash without KERDI, or with the wrong thin-set, sets up a wall to fail silently. And the assembly rules are unforgiving – overlap direction, band at every corner, specified thin-set, cure time before grout. Get one wrong and the water goes exactly where you didn’t want it. If tile is lifting, grout is darkening, or a wall feels soft, that’s the point to stop and call. Call (844) 560-4789 for a free estimate – a live person answers, not a voicemail.
FAQs

A correctly installed Schluter assembly – genuine membrane, banded seams, specified thin-set – is generally expected to hold up for the life of the tile it supports, often 20 years or more. What shortens it in Vallejo is exterior-wall moisture and the clay-soil movement that cycles tile joints. National brand warranties cover the material; our 365-Day Done Right Promise covers the installation for a full year. Call (844) 560-4789 for a free estimate on yours.
Sometimes. A single lifted edge profile or a failed counter-to-wall seal is a targeted repair. A membrane that has let water into the wall is not – once the substrate is wet, the affected area has to come out, the cavity dried, and the assembly rebuilt correctly. We’ll tell you which one you’re looking at, in writing, before any work starts. Call (844) 560-4789 for a free estimate.
A backsplash redo with new KERDI behind it typically runs a few days including cure time between thin-set, membrane, and grout. A full kitchen remodel carrying membrane, tile, cabinets, and counters runs several weeks, scheduled by appointment. We don’t promise same-day on planned kitchen work – it isn’t honest, and it isn’t how a correct assembly gets built. Call (844) 560-4789 for a free estimate and a realistic timeline.
We work through supplier channels that carry the genuine Schluter system – the membrane, KERDI-BAND, KERDI-FIX, and the profiles sized to your tile – plus the specified thin-set the assembly requires. You get the material list and the manufacturer paperwork with your written quote. We don’t claim to stock parts or carry them on a truck; we source them to spec for your job. Call (844) 560-4789 for a free estimate.
When your kitchen’s waterproofing or tile interface has failed, the fix is a documented assembly, a written price, and a guarantee that holds. Bradford Remodeling Co Vallejo puts all three on paper: a written price before the first tool comes out, background-checked and uniformed technicians on the job, and the 365-Day Done Right Promise on the finished work. Our technicians have up to 22 years of experience, and a live person answers the phone 24 hours a day. Call (844) 560-4789 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Vallejo, serving Vallejo and nearby areas.












