







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Vallejo, CA
We provide independent CGI service across Vallejo: cabinet installation and refacing, quartz and granite countertops, and full kitchen remodeling. The thing that makes our CGI work different here is that we plan around Vallejo’s raised foundations and retrofit inspections before a single box goes in. CGI cabinet lines land in Vallejo kitchens of every age, and the failures we see follow the housing stock, not the calendar. If your doors are peeling, your run is out of level, or you’re pricing a full kitchen, call (844) 560-4789 for a free estimate. We put the price in writing before any work starts.

Why Vallejo Residents Choose Us for CGI Service

We’re an independent CGI service provider. We are not affiliated with, authorized by, or sponsored by the manufacturer. That independence is a feature, not a technicality. It means we diagnose a CGI box, hinge, or countertop on its actual condition rather than steering you toward a new line because a factory program prefers it.
Our technicians have up to 22 years of experience. In Vallejo that experience means knowing which CGI lines were builder-grade installations in the 1990s and 2000s tract kitchens east of I-80, and which are face-frame cabinets from remodels of pre-1950 bungalows in Old Town and the Heritage District. Those two populations fail in different ways.
We match OEM-compatible parts where a CGI line is still supported. We go to quality aftermarket hinges, glides, and levelling legs when OEM is discontinued or priced past the value of the box. You get a written price before work begins, and every completed project carries the 365-Day Done Right Promise: if the work fails inside that window, we come back and correct it at no charge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in Vallejo
- Thermofoil delamination and edge peeling. CGI thermofoil raised-panel and slab doors peel from the edges inward, exposing raw MDF behind the film. Vallejo’s coastal fog and bay humidity speed this up. Once the film lifts, moisture gets into the core and the damage moves under the door.
- Failed hinges and drawer glides on particleboard boxes. Particleboard swells when it takes on water, and screws no longer bite. Under-sink leaks and slab-on-grade wicking in Vallejo’s older homes are the usual culprits. A door that hangs crooked is often telling you the box is failing, not the hinge.
- Out-of-level face frames and out-of-square boxes. Raised pier-and-post foundations settle. When they do, a cabinet run that was set level goes crooked against the floor and wall. We check flatness first, because a new countertop on a racked run will show the gap.
- Countertop seam separation and edge chipping. Laminate and CGI quartz tops separate at the seams and chip at the edges when the cabinet run underneath isn’t flat. Water staining at sink cutouts is common on older laminate, where the caulk has failed and nobody noticed.
- Sequencing clashes with retrofit work. When a kitchen sits over a raised foundation that’s getting bolted and braced, cabinets have to come out and go back in around the inspection. We plan the order so the kitchen doesn’t get built twice.
CGI Service in Vallejo: What Local Conditions Mean for Your Equipment
Vallejo’s soft-story and seismic retrofit permitting routinely requires opening up walls and foundations. On the raised-foundation WWII and postwar houses near the waterfront, that’s where inspectors start flagging original knob-and-tube-era wiring and aging pier-and-post supports. For a CGI kitchen or bath, that changes the job sequence: the retrofit inspection comes before cabinets go back in, not after. Homeowners in Vallejo Heights and the Heritage District often learn about this step only after their first inspection, when the cabinet order is already placed. We build the retrofit schedule into the kitchen timeline from the estimate forward, so the cabinets, the quartz top, and the bolting all land in the right order. It’s a step many contractors skip until it bites them.
CGI Models & Products We Service in Vallejo
We service CGI thermofoil raised-panel and slab doors, the builder-grade lines that filled tract kitchens east of I-80 in the 1990s and 2000s, along with CGI painted maple and oak face-frame cabinets from pre-1950 bungalow and Craftsman remodels. We also work CGI quartz and laminate countertop lines and all three CGI cabinet construction tiers: plywood box, particleboard box, and MDF door.
Parts are sourced per job against the specific line and finish, not held in local stock. That lets us match the OEM CGI door, hinge, or drawer hardware when the line is supported, and switch to quality aftermarket components when it isn’t.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Vallejo

CGI work in Vallejo usually starts with the cabinet box, not the door. If the box is sound, new doors and hardware reshape the kitchen at a fraction of replacement cost. If the box has swelled, delaminated, or racked beyond shimming, it has to go.
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Full Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
What drives the number: how many boxes are salvageable, whether the run needs re-shimming against a settled floor, top material and edge profile, and whether retrofit inspection work has to be sequenced into the job. A free estimate includes an on-site box and hinge assessment, a floor and wall flatness check, and a written line-item price. Call (844) 560-4789 to schedule yours.
Serving Vallejo, CA – Our Local Coverage Area
We serve Vallejo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Vallejo
Often they can be saved if the cabinet box is still sound. Peeling thermofoil usually means the door face has failed, not the box. We check whether the core under the film has swelled; if it hasn’t, OEM-match replacement doors and new hinges on the existing boxes restore the run. If the core has taken on water, replacement is the cheaper route over time. Call (844) 560-4789 for an assessment.
Yes. Retrofit permitting in Vallejo often requires opening walls and foundations, and inspectors frequently flag original knob-and-tube-era wiring and aging pier-and-post supports on the raised-foundation homes near the waterfront. That means the retrofit inspection has to happen before cabinets go back in. Sequencing the two jobs correctly is what keeps a kitchen from being built twice.
Because the house has moved, not the cabinets. Raised pier-and-post foundations settle over decades, and the floor and wall a cabinet run sits against go out of level and square. The fix is to check flatness, shim and re-secure the boxes to the wall, and set the countertop against a verified flat run. Installing a new top on a racked run just moves the gap to the seam.
Quartz is worth it when the cabinet boxes are sound and level. On a solid, flat run, a CGI quartz top gives you a surface that holds up to heat, cutting, and decades of use, where laminate chips at the edges and stains at sink cutouts. On a swollen or racked box, fix the box first; a quartz top will telegraph every flaw underneath. Call (844) 560-4789 for a written line-item price on both options.
It attacks cabinet edges and seams first. Vallejo’s coastal fog and mild, wet winters push moisture into thermofoil edges, sink cutouts, and any exposed particleboard, which swells the core and pulls hardware loose. Wind-driven rain off San Pablo Bay adds to the load on exterior walls behind the cabinet run. Good caulk lines, tight seams, and a check under the sink twice a year are what slow it down.
Service Areas Near Vallejo
We work CGI kitchens across Vallejo and the towns around it, including American Canyon, Benicia, Martinez, Pleasant Hill, and Rodeo. Homes in these areas share much of the same housing age and bay climate, so the cabinet and countertop issues tend to rhyme. See our full Vallejo service area for neighborhood coverage, and our CGI service page for the brand-level detail.
Book Your CGI Service in Vallejo Today
Call (844) 560-4789 for a free estimate on your CGI kitchen or countertop work in Vallejo. A live person answers 24/7, not a voicemail. We’ll assess the boxes, check the run for level and square, and put a written line-item price in your hand before any work starts. Every completed project is covered by the 365-Day Done Right Promise.
Written by the team at Bradford Remodeling Co Vallejo.












